Valid

JB/T 1754-2008Valve components - Connector assemblies (English PDF)

阀门零部件 接头组件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 1754-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 1754-2008 is the English-translated version of 阀门零部件 接头组件.

JB/T 1754-2008 is a recommended standard of the Chinese machinery industry covering valve connector assemblies. It specifies the structural forms, the dimensions, the materials and the requirements of the connector, the connector pad and the connector nut, and it applies to forged steel valves.

The catalogue records it as replacing JB/T 1753-1991, JB/T 1754-1991, JB/T 1755-1991, JB/T 2770-1992 and JB/T 2771-1992. Among the standards it quotes are GB/T 699-1999, GB/T 1220-2007, GB/T 1804-2000 and the first three parts of GB/T 3880. It carries Chinese classification J16 and ICS 23.060.

Found what you need?

Document preview — JB/T 1754-2008

National Standard of the People's Republic of China

ICS
23.060
Replacing
JB/T 1754-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 1754-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition JB/T 1754-1991.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry covering valve connector assemblies. It specifies the structural forms, the dimensions, the materials and the requirements of the connector, the connector pad and the connector nut, and it applies to forged steel valves. The catalogue records it as replacing JB/T 1753-1991, JB/T 1754-1991, JB/T 1755-1991, JB/T 2770-1992 and JB/T 2771-1992. Among the standards it quotes are GB/T 699-1999, GB/T 1220-2007, GB/T 1804-2000 and the first three parts of GB/T 3880. It carries Chinese classification J16 and ICS 23.060.

JB/T 1754-2008 falls under ICS 23.060, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels

GB/T 1220-2007 — Stainless steel bars

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 3880.1-2006 — Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 1: Technical conditions of delivery

GB/T 3880.2-2006 — Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 2: Mechanical properties

GB/T 3880.3-2006 — Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Tolerances on forms and dimensions

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 1754-1991 (earlier edition)

Standards on related subjects:

GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections

HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications

JB/T 106-2004 — Valves - Marking and painting

JB/T 1308.1-2025 — PN2500 Ultra-high pressure valve and fitting - Part 1: Valve type and basic parameter

JB/T 1759-2010 — Valve components - Bushings

JB/T 1757-2008 — Valve components - Ferrules and ferrule nuts

6 Classification and status

International classification (ICS): 23.060

Chinese Standard Classification (CCS): J 16

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 1754

EditionTitleRevisionStatus
JB/T 1754-2008Valve components - Connector assembliescurrent editionCurrent
JB/T 1754-1991Valve components - Connector assembliesprevious editionSuperseded

This page sells the current edition, JB/T 1754-2008. Earlier editions are listed for reference only.

How to Download JB/T 1754-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 1754-2008

$105.00