Valid

JB/T 1712-2008Valve components - Packings and packing washers (English PDF)

阀门零部件 填料和填料垫

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 1712-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 1712-2008 is the English-translated version of 阀门零部件 填料和填料垫.

Packing for valves is the subject of JB/T 1712-2008, a recommended Chinese machinery industry standard. It specifies the structure, the size and the technical requirements of flexible graphite packing, plastic packing and the packing cushion, and the application it states is flexible graphite packing and plastic packing.

Four earlier documents are listed as superseded: JB/T 1712-1991, JB/T 1713-1991, JB/T 1716-1991 and JB/T 5209-1991. Among the standards it quotes are GB/T 700-2006, GB/T 1220-2007, GB/T 12226-2005 and JB/T 6617-1993.

The catalogue gives Chinese classification J16 and ICS 23.060, and names the Ministry of Industry and Information Technology as the issuing agency.

Found what you need?

Document preview — JB/T 1712-2008

National Standard of the People's Republic of China

ICS
23.060
Replacing
JB/T 1713-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 1712-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition JB/T 1712-1991.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Packing for valves is the subject of JB/T 1712-2008, a recommended Chinese machinery industry standard. It specifies the structure, the size and the technical requirements of flexible graphite packing, plastic packing and the packing cushion, and the application it states is flexible graphite packing and plastic packing. Four earlier documents are listed as superseded: JB/T 1712-1991, JB/T 1713-1991, JB/T 1716-1991 and JB/T 5209-1991. Among the standards it quotes are GB/T 700-2006, GB/T 1220-2007, GB/T 12226-2005 and JB/T 6617-1993. The catalogue gives Chinese classification J16 and ICS 23.060, and names the Ministry of Industry and Information Technology as the issuing agency.

JB/T 1712-2008 falls under ICS 23.060, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 700-2006 — Carbon structural steels

GB/T 1220-2007 — Stainless steel bars

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

GB/T 12226-2005 — General purpose industrial valve - Specification of flake graphite iron castings

JB/T 6617-1993 — Flexible graphite packing rings for valves - Technical specifications

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 1712-1991 (earlier edition)

Standards on related subjects:

GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections

HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications

JB/T 106-2004 — Valves - Marking and painting

JB/T 1708-2010 — Valve components - Gland flanges, gland sleeves and gland plates

JB/T 1703-2008 — Components of valves - Bushes

JB/T 1702-2008 — Components of valves - Bearing glands

6 Classification and status

International classification (ICS): 23.060

Chinese Standard Classification (CCS): J 16

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 1712

EditionTitleRevisionStatus
JB/T 1712-2008Valve components - Packings and packing washerscurrent editionCurrent
JB/T 1713-1991Valve components - Packings and packing washersprevious editionSuperseded

This page sells the current edition, JB/T 1712-2008. Earlier editions are listed for reference only.

How to Download JB/T 1712-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 1712-2008

$105.00