Valid

JB/T 1702-2008Components of valves - Bearing glands (English PDF)

阀门零部件 轴承压盖

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 1702-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 1702-2008 is the English-translated version of 阀门零部件 轴承压盖.

The bearing gland is the component covered by JB/T 1702-2008, a recommended Chinese machinery industry standard. It fixes the structural type of the gland, its size and its technical requirements.

The field of application given in the summary is gate valves. Two earlier parts, JB/T 1702.1-1991 and JB/T 1702.2-1991, are recorded as superseded by this single document.

Among the standards it quotes are GB/T 196-2003, GB/T 197-2003, GB/T 699-1999 and GB/T 1804-2000. The entry places it under Chinese classification J16 and ICS 23.060.

Found what you need?

Document preview — JB/T 1702-2008

National Standard of the People's Republic of China

ICS
23.060
Replacing
JB/T 1702.2-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 1702-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It is one of 3 parts of the JB/T 1702 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

The bearing gland is the component covered by JB/T 1702-2008, a recommended Chinese machinery industry standard. It fixes the structural type of the gland, its size and its technical requirements. The field of application given in the summary is gate valves. Two earlier parts, JB/T 1702.1-1991 and JB/T 1702.2-1991, are recorded as superseded by this single document. Among the standards it quotes are GB/T 196-2003, GB/T 197-2003, GB/T 699-1999 and GB/T 1804-2000. The entry places it under Chinese classification J16 and ICS 23.060.

JB/T 1702-2008 falls under ICS 23.060, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 196-2003 — General purpose metric screw threads - Basic dimensions

GB/T 197-2003 — General purpose metric screw threads – Tolerances

GB/T 699-1999 — [Replaced by GB/T 699-2015] Quality carbon structural steels

GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications

4 Where this standard sits

It cites 4 standards, among them GB/T 196-2003, GB/T 197-2003, GB/T 699-1999, listed in full above.

It is one part of the JB/T 1702 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 1702.1-1991 — Bearing glands (1)

JB/T 1702.2-1991 — Bearing glands (2)

Standards on related subjects:

GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections

HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications

JB/T 106-2004 — Valves - Marking and painting

JB/T 1708-2010 — Valve components - Gland flanges, gland sleeves and gland plates

JB/T 1701-2010 — Valve components - Stem nuts

JB/T 1700-2008 — Valve components - Nuts, bolts and plugs

7 Classification and status

International classification (ICS): 23.060

Chinese Standard Classification (CCS): J 16

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 1702

EditionTitleRevisionStatus
JB/T 1702-2008Components of valves - Bearing glandscurrent editionCurrent
JB/T 1702.2-1991Components of valves - Bearing glandsprevious editionSuperseded

This page sells the current edition, JB/T 1702-2008. Earlier editions are listed for reference only.

How to Download JB/T 1702-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 1702-2008

$145.00