JB/T 1472-2011Mechanical seals for pumps (English PDF)
泵用机械密封
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 1472-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 1472-2011 is the English-translated version of 泵用机械密封.
JB/T 1472-2011 is the Chinese standard "Mechanical seals for pumps". Its scope clause reads: This standard specifies the basic type, size, parameters, model and material code, technical requirements, test methods, packaging, marking and storage of mechanical seals for pumps.
This standard is applicable to the mechanical seals of centrifugal pumps, vortex pumps and other similar pumps.
Found what you need?
Document preview — JB/T 1472-2011
National Standard of the People's Republic of China
- Replacing
- JB/T 1472-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Basic types, dimensions, parameters, models and material codes
- 3.1 Basic type
- 3.2 Main dimensions
- 3.3 Basic parameters
- 3.4 Models
- 3.5 Material codes
- 4 Technical requirements
- 4.1 Technical requirements for main parts
- 4.2 Performance requirements
- 4.3 Requirements for installation and use
- 5 Test method
- 6 Packaging, marking and storage
1 Scope
This standard specifies the basic type, size, parameters, model and material code, technical requirements, test methods, packaging, marking and storage of mechanical seals for pumps.
This standard is applicable to the mechanical seals of centrifugal pumps, vortex pumps and other similar pumps.
2 Normative references
The following referenced documents are indispensable for the application of this standard. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerances for features without individual tolerance indications
GB/T 10444 Method of type establishment for mechanical seals
GB/T 14211 Test method of mechanical seal
JB/T 4127.1 Specification for mechanical seals
JB/T 6374 Silicon carbide rings of mechanical seal—Specification
JB/T 7757.1 Cylindrical helical compression spring for mechanical seal
JB/T 7757.2 The rubber O-ring for mechanical seal
JB/T 8724 Reactively sintered silicon nitride seal ring for mechanical seal
JB/T 8871 Bank of hard alloy sealing ring for mechanical seal
JB/T 8872 Specifications for carbon-graphite sealing ring for mechanical seals
JB/T 8873 Specifications on filling-PTFE and PTFE blank for mechanical seal
JB/T 10874 Specifications for alumina ceramics sealing rings of mechanical seal
3 Basic types, dimensions, parameters, models and material codes
3.1 Basic type
There are seven basic types of mechanical seals for pumps:
a) Type 103: Built-in type, single end face, single-spring, unbalanced, parallel-coil spring transmission mechanical seal, as shown in Figure 1;
b) Type B103: Built-in type, single end face, single-spring, balanced, parallel-coil spring transmission mechanical seal, as shown in Figure 2;
c) Type 104: Built-in type, single end face, single-spring, unbalanced sleeve transmission mechanical seal, as shown in Figure 3; see its derivative type 104a in Figure 4;
d) Type B104: Built-in type, single end face, single-spring, balanced sleeve transmission mechanical seal, as shown in Figure 5; see its derivative type B104a in Figure 6;
e) Type 105: Built-in type, single end face, multi-spring, unbalanced screw transmission mechanical seal, as shown in Figure 7;
f) Type B105: Built-in type, single end face, multi-spring, balanced screw transmission mechanical seal, as shown in Figure 8;
g) Type 114: Externally-mounted type, single seal, single spring, over-balanced fork transmission mechanical seal, as shown in Figure 9; see its derivative Type 114a in Figure 10.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 1472
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 1472-2011 | Mechanical seals for pumps | current edition | Current |
| JB/T 1472-1994 | Mechanical seals for pumps | previous edition | Superseded |
This page sells the current edition, JB/T 1472-2011. Earlier editions are listed for reference only.
How to Download JB/T 1472-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 1472-2011
$265.00