JB/T 13607-2018Specification for YZSE series (IP55) three-phase induction motors for direct-drive water pumps (frame size 80 to 355) (English PDF)
YZSE系列(IP55)直驱式水泵专用三相异步电动机技术条件（机座号80～355）
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13607-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 21, 2018
Implementation date
October 1, 2019
Scope
JB/T 13607-2018 is the English-translated version of YZSE系列(IP55)直驱式水泵专用三相异步电动机技术条件（机座号80～355）.
The YZSE series (IP55) three-phase asynchronous motors for direct-drive pumps are covered by JB/T 13607-2018, a recommended standard of the Chinese mechanical and machinery industry.
It sets out the types, basic parameters and dimensions of these motors, followed by the technical requirements, the test methods and the inspection rules. Marking, packaging and the warranty period are dealt with too.
The motors, in frame sizes from 80 to 355, are intended for clean-water centrifugal pumps, and motors derived from the series may also refer to it.
Filed under K22 in China and issued by the Ministry of Industry and Information Technology, it quotes GB/T 191-2008, GB/T 755, GB/T 997-2008, GB/T 1032-2012, GB/T 1971-2006, GB/T 1993-1993, GB/T 4772.1-1999, GB/T 4942.1-2006, GB/T 10068-2008, GB/T 10069.1-2006, GB/T 12665-2017, GB/T 14711-2013, GB/T 22719.1-2008 and GB/T 22719.2-2008.
Found what you need?
Document preview — JB/T 13607-2018
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 13607-2018 was issued by MIIT on 21 December 2018 and has been in force since 1 October 2019.
2 Scope
The YZSE series (IP55) three-phase asynchronous motors for direct-drive pumps are covered by JB/T 13607-2018, a recommended standard of the Chinese mechanical and machinery industry. It sets out the types, basic parameters and dimensions of these motors, followed by the technical requirements, the test methods and the inspection rules. Marking, packaging and the warranty period are dealt with too. The motors, in frame sizes from 80 to 355, are intended for clean-water centrifugal pumps, and motors derived from the series may also refer to it. Filed under K22 in China and issued by the Ministry of Industry and Information Technology, it quotes GB/T 191-2008, GB/T 755, GB/T 997-2008, GB/T 1032-2012, GB/T 1971-2006, GB/T 1993-1993, GB/T 4772.1-1999, GB/T 4942.1-2006, GB/T 10068-2008, GB/T 10069.1-2006, GB/T 12665-2017, GB/T 14711-2013, GB/T 22719.1-2008 and GB/T 22719.2-2008.
3 Normative references
JB/T 13607-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191-2008
GB/T 755
GB/T 997-2008
GB/T 1032-2012
GB/T 1971-2006
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4772.1-1999
GB/T 4942.1-2006
GB/T 10068-2008
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2017 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB/T 14711-2013
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
4 About this standard
Issued by: MIIT
English translation: about 20 pages
5 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 755Rotating electrical machines - Rating and performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1032-2012Test methods for three-phase asynchronous motors
- GB/T 1971-2006Rotating electrical machines - Terminal markings and direction of rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
GB/T 4942.1-2006
Similar standards
How to Download JB/T 13607-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2017 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB/T 1993-1993 — Cooling methods for rotating electrical machines
Secure payment via Stripe
Payments accepted
JB/T 13607-2018
$345.00