JB/T 13417-2018Electric flat cars for foundries (English PDF)
铸造用电动平车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13417-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2018
Implementation date
December 1, 2018
Scope
JB/T 13417-2018 is the English-translated version of 铸造用电动平车.
JB/T 13417-2018 is a recommended machinery industry standard of China for the electric flat carriage used in foundries. It fixes the type and the basic parameters of the electric flat car for casting, the technical requirements, the test methods and the inspection rules, and it closes with marking, packaging, transport and the warranty period.
Its Chinese classification is J61 and its international classification 25.120.30; the issuing agency is the Ministry of Industry and Information Technology. The standards it quotes are GB/T 1804-2000, GB/T 3098.1-2010, GB/T 3098.2-2015, GB 5226.1, GB/T 9969, GB/T 13306, GB 20905, GB/T 23570, GB/T 25371, GB/T 25711-2010 and JB/T 6127-2010.
Found what you need?
Document preview — JB/T 13417-2018
National Standard of the People's Republic of China
- ICS
- 25.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 13417-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2018 and has been in force since 1 December 2018.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended machinery industry standard of China for the electric flat carriage used in foundries. It fixes the type and the basic parameters of the electric flat car for casting, the technical requirements, the test methods and the inspection rules, and it closes with marking, packaging, transport and the warranty period. Its Chinese classification is J61 and its international classification 25.120.30; the issuing agency is the Ministry of Industry and Information Technology. The standards it quotes are GB/T 1804-2000, GB/T 3098.1-2010, GB/T 3098.2-2015, GB 5226.1, GB/T 9969, GB/T 13306, GB 20905, GB/T 23570, GB/T 25371, GB/T 25711-2010 and JB/T 6127-2010.
JB/T 13417-2018 falls under ICS 25.120.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3098.1-2010 — Mechanical properties of fasteners - Bolts, screws and studs
GB/T 3098.2-2015 — Mechanical properties of fasteners -- Nuts
GB 5226.1
GB/T 9969
GB/T 13306
GB 20905
GB/T 23570
GB/T 25371
GB/T 25711-2010 — Foundry machinery - General technical requirements
JB/T 6127-2010 — Electric flat cars - Technical requirements
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 37365-2019 — Die casting unit—Performance testing method
JB/T 13248-2018 — Energy efficiency grades and evaluation methods for die casting machines
GB/T 21269-2018 — Cold chamber die casting machines
JB/T 13420-2018 — Swing-bed pass-through shot blasting machines - Technical requirements
JB/T 13419-2018 — On-line testing devices for moulding sand properties - Technical requirements
JB/T 13418-2018 — Core knockout machines - Technical requirements
6 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3098.1-2010Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 3098.2-2015Mechanical properties of fasteners - Part 2: Nuts
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
Similar standards
How to Download JB/T 13417-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 20905-2007 — Safety requirements for foundry machinery
GB 20905-2025 — Foundry machinery - Safety requirements
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
JB/T 13417-2018
$105.00