Valid

JB/T 13331-2017Milling cutter arbors for turbine blade machining - Technical requirements (English PDF)

汽轮机叶片加工铣刀杆 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 13331-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2017

Implementation date

April 1, 2018

Scope

JB/T 13331-2017 is the English-translated version of 汽轮机叶片加工铣刀杆 技术条件.

JB/T 13331-2017 is a recommended Chinese machinery industry standard setting the technical requirements for the milling cutter arbors used in turbine blade machining.

It fixes the form and position tolerances of the arbor and the material and hardness to which it is made, and it gathers these with the remaining technical requirements for the tool.

Basic provisions on marking and packaging round out the document. It quotes GB/T 1804. The standard carries the Chinese classification J41 and the international classification 25.100.20, and it was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 13331-2017

National Standard of the People's Republic of China

ICS
25.100.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 13331-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard setting the technical requirements for the milling cutter arbors used in turbine blade machining. It fixes the form and position tolerances of the arbor and the material and hardness to which it is made, and it gathers these with the remaining technical requirements for the tool. Basic provisions on marking and packaging round out the document. It quotes GB/T 1804. The standard carries the Chinese classification J41 and the international classification 25.100.20, and

JB/T 13331-2017 falls under ICS 25.100.20, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1804

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 972-2008 — Thread rolling flat dies

GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines

GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines

JB/T 13332-2017 — Carbide band saw blades for metal cutting - Technical requirements

JB/T 13330-2017 — Inspection methods for single-tube internal chip removal (BTA) deep hole drills

JB/T 13329-2017 — Superhard end mills with exchangeable heads

6 Classification and status

International classification (ICS): 25.100.20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 13331-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 13331-2017

$95.00