JB/T 13287-2017Diesel engines - Linerless cast iron cylinder blocks (English PDF)
柴油机 无缸套铸铁机体
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13287-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2017
Implementation date
April 1, 2018
Scope
JB/T 13287-2017 is the English-translated version of 柴油机 无缸套铸铁机体.
JB/T 13287-2017 is a recommended Chinese machinery industry standard for the linerless cast iron cylinder block of a diesel engine. It lays down the technical requirements for the casting and for the machined parts made from it, the test methods, the acceptance specifications and the provisions for marking, packaging, transportation and storage.
The blocks it deals with are those of diesel engines built without cylinder liners. Among the standards it quotes are GB/T 191, GB/T 197, GB/T 1031-2009, GB/T 1184-1996, GB/T 1771, GB/T 1800.1-2009, GB/T 1958, GB/T 2828.1-2012, GB/T 3821, GB/T 6414, GB/T 7216-2009, GB/T 9439-2010 and GB/T 10610-2009. Its classifications are J92 and 27.020.
Found what you need?
Document preview — JB/T 13287-2017
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 13287-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.
2 Scope
This standard is a recommended Chinese machinery industry standard for the linerless cast iron cylinder block of a diesel engine. It lays down the technical requirements for the casting and for the machined parts made from it, the test methods, the acceptance specifications and the provisions for marking, packaging, transportation and storage. The blocks it deals with are those of diesel engines built without cylinder liners. Among the standards it quotes are GB/T 191, GB/T 197, GB/T 1031-2009, GB/T 1184-1996, GB/T 1771, GB/T 1800.1-2009, GB/T 1958, GB/T 2828.1-2012, GB/T 3821, GB/T 6414, GB/T 7216-2009, GB/T 9439-2010 and GB/T 10610-2009. Its classifications are J92 and 27.020.
3 Normative references
JB/T 13287-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 197
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1771
GB/T 1800.1-2009
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 1958
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 2829-2002
GB/T 3821
GB/T 6060.1-1997
GB/T 6388
GB/T 6414
GB/T 7216-2009
GB/T 9439-2010
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 18778.2
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 197General purpose metric screw threads -- Tolerances
- GB/T 1031-2009Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1771Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)
- GB/T 1800.1-2009Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
Similar standards
How to Download JB/T 13287-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
Secure payment via Stripe
Payments accepted
JB/T 13287-2017
$225.00