JB/T 13247-2018Low pressure casting machines - Test method for energy consumption (English PDF)
低压铸造机 能耗检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13247-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 9, 2018
Implementation date
October 1, 2018
Scope
JB/T 13247-2018 is the English-translated version of 低压铸造机 能耗检测方法.
JB/T 13247-2018 is a recommended machinery industry standard of China that fixes the test method for the energy consumption of low pressure die-casting machines.
It describes the measurement, the calculation and the statement of the status parameters for that consumption.
It applies to the complete aluminium alloy low pressure casting machine, taking in the energy used by the motors, the oil pump motor and the water-cooled motor among them, and by the holding furnace with its insulation sleeve, pressurised chamber and insulation room.
It does not apply to sand type low pressure casting machines or to induction heating low pressure casting machines. The standard is classified J61 and 25.120.30, quotes GB 24391, GB/T 28688 and JB/T 12247, and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 13247-2018
National Standard of the People's Republic of China
- ICS
- 25.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 13247-2018 was issued by MIIT on 9 February 2018 and has been in force since 1 October 2018.
2 Scope
JB/T 13247-2018 is a recommended machinery industry standard of China that fixes the test method for the energy consumption of low pressure die-casting machines. It describes the measurement, the calculation and the statement of the status parameters for that consumption. It applies to the complete aluminium alloy low pressure casting machine, taking in the energy used by the motors, the oil pump motor and the water-cooled motor among them, and by the holding furnace with its insulation sleeve, pressurised chamber and insulation room. It does not apply to sand type low pressure casting machines or to induction heating low pressure casting machines. The standard is classified J61 and 25.120.30, quotes GB 24391, GB/T 28688 and JB/T 12247, and was issued by the Ministry of Industry and Information Technology.
3 Normative references
JB/T 13247-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 24391
GB/T 28688
JB/T 12247
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 13247-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 24391-2009 — Low pressure die casting machine - Safety requirements
GB/T 28688-2012 — Low pressure die casting machine - Technical requirements
JB/T 12247-2015 — Low pressure die casting machine - Types and basic parameters
Secure payment via Stripe
Payments accepted
JB/T 13247-2018
$195.00