JB/T 13159-2017Non-destructive testing - Practice for in situ examination of ferromagnetic heat-exchanger tubes using remote field testing (English PDF)
无损检测 在役铁磁性热交换器管的远场涡流检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 13159-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
January 1, 2018
Scope
JB/T 13159-2017 is the English-translated version of 无损检测 在役铁磁性热交换器管的远场涡流检测方法.
Remote field testing of ferromagnetic heat-exchanger tubes in place is the subject of JB/T 13159-2017, a recommended standard of the Chinese mechanical and machinery industry.
It sets the basic requirements for far-field eddy current testing of heat exchange tubes in service, the factors that affect it, the far-field eddy current testing system, the comparison test tubes, the testing procedure and the test report.
It applies to ferromagnetic tubes with an outer diameter from 13 mm to 51 mm and a wall thickness from 0.7 mm to 3.5 mm. The Chinese classification is J04 and the international classification 19.100; the Ministry of Industry and Information Technology issued it. It quotes GB/T 5616-2014, GB/T 9445, GB/T 12604.6 and GB/T 20737.
Found what you need?
Document preview — JB/T 13159-2017
National Standard of the People's Republic of China
- ICS
- 19.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 13159-2017 was issued by MIIT on 12 April 2017.
2 Scope
Remote field testing of ferromagnetic heat-exchanger tubes in place is the subject of JB/T 13159-2017, a recommended standard of the Chinese mechanical and machinery industry. It sets the basic requirements for far-field eddy current testing of heat exchange tubes in service, the factors that affect it, the far-field eddy current testing system, the comparison test tubes, the testing procedure and the test report. It applies to ferromagnetic tubes with an outer diameter from 13 mm to 51 mm and a wall thickness from 0.7 mm to 3.5 mm. The Chinese classification is J04 and the international classification 19.100; the Ministry of Industry and Information Technology issued it. It quotes GB/T 5616-2014, GB/T 9445, GB/T 12604.6 and GB/T 20737.
3 Normative references
JB/T 13159-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 5616-2014 — Non-destructive testing—Guidelines for application
GB/T 9445
GB/T 12604.6
GB/T 20737
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 19.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download JB/T 13159-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12604.6-2021 — Non-destructive testing - Terminology - Eddy current testing
GB/T 20737-2006 — Non-destructive testing -- General terms and definitions
GB/T 5616-2014 — Non-destructive testing—Guidelines for application
Secure payment via Stripe
Payments accepted
JB/T 13159-2017
$225.00