JB/T 12810-2016Mills for coal water slurry (English PDF)
水煤浆用磨机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12810-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 5, 2016
Implementation date
September 1, 2016
Scope
JB/T 12810-2016 is the English-translated version of 水煤浆用磨机.
JB/T 12810-2016 is a recommended standard of the Chinese machinery industry covering mills used to prepare coal water slurry. It fixes the product classification for these mills and their technical requirements, test methods and inspection rules, and it closes with the provisions on marking, the instruction manual, packaging, transport and storage.
The machines it addresses are the ball mills and rod mills that grind coal of varying hardness by the wet process in order to prepare fuel coal water slurry and gasification coal water slurry.
Among the standards it quotes are GB/T 191, GB/T 700-2006, GB/T 3768, GB 5226.1, GB/T 9444-2007, GB/T 25708-2010 and JB/T 5000.3-2007. It carries the Chinese classification D94 and ICS 73.120, and the issuing agency is the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 12810-2016
National Standard of the People's Republic of China
- ICS
- 73.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 12810-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 April 2016 and has been in force since 1 September 2016.
2 Scope
This standard is a recommended standard of the Chinese machinery industry covering mills used to prepare coal water slurry. It fixes the product classification for these mills and their technical requirements, test methods and inspection rules, and it closes with the provisions on marking, the instruction manual, packaging, transport and storage. The machines it addresses are the ball mills and rod mills that grind coal of varying hardness by the wet process in order to prepare fuel coal water slurry and gasification coal water slurry. Among the standards it quotes are GB/T 191, GB/T 700-2006, GB/T 3768, GB 5226.1, GB/T 9444-2007, GB/T 25708-2010 and JB/T 5000.3-2007. It carries the Chinese classification D94 and ICS 73.120, and the issuing agency is the Ministry of Industry and Information Technology.
3 Normative references
JB/T 12810-2016 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 700-2006 — Carbon structural steels
GB/T 1174
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3768
GB 5226.1
GB/T 5680
GB/T 7233.1-2009
GB/T 9439
GB/T 9444-2007
GB/T 9969
GB/T 10095.1-2008
GB/T 10095.2-2008
GB/T 13306
GB/T 18241.2-2000 — Rubber lining--Part 2:Lining for grinding mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments
JB/T 5000
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
International classification (ICS): 73.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 700-2006Carbon structural steels
- GB/T 1174Cast bearing alloy
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
JB/T 5000
Similar standards
How to Download JB/T 12810-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
Secure payment via Stripe
Payments accepted
JB/T 12810-2016
$269.00