JB/T 12779-2016Ribbon feed mixer (English PDF)
螺带饲料混合机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12779-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 5, 2016
Implementation date
September 1, 2016
Scope
JB/T 12779-2016 is the English-translated version of 螺带饲料混合机.
JB/T 12779-2016 is a recommended Chinese machinery industry standard for the ribbon feed mixer. It opens with terms and definitions and the way the types are designated, then sets the requirements, the test methods and the inspection rules, and ends with marking, packaging, transport and storage.
The machine it describes is the single-shaft horizontal ribbon mixer used to mix powdered feed in batches, called the mixer throughout. Among the standards it quotes are GBZ/T 192.1, GB 2894, GB 5226.1, GB/T 17890 and JB/T 11689-2013.
It carries the Chinese classification B93 and ICS 65.060, and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 12779-2016
National Standard of the People's Republic of China
- ICS
- 65.060
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12779-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 April 2016 and has been in force since 1 September 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the ribbon feed mixer. It opens with terms and definitions and the way the types are designated, then sets the requirements, the test methods and the inspection rules, and ends with marking, packaging, transport and storage. The machine it describes is the single-shaft horizontal ribbon mixer used to mix powdered feed in batches, called the mixer throughout. Among the standards it quotes are GBZ/T 192.1, GB 2894, GB 5226.1, GB/T 17890 and JB/T 11689-2013. It carries the Chinese classification B93 and ICS 65.060, and was issued by the Ministry of Industry and Information Technology.
JB/T 12779-2016 falls under ICS 65.060, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GBZ/T 192.1
GB 2894
GB/T 3768
GB 5226.1
GB/T 5918
GB/T 10647
GB/T 17890
GB/T 18695
JB/T 11299
JB/T 11689-2013 — Single-shaft paddle mixer for feed
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 24674-2021 — Waste submersible motor-pumps
GB/T 12785-2014 — Test methods for submersible motor-pumps
JB/T 10600-2006 — Vertical self-priming pumps
JB/T 12780-2016 — Screw feed extruders - Screws
JB/T 12778-2016 — Ring die pellet mills - Press rollers
JB/T 12777-2016 — Flap-type pellet feed coolers
6 Classification and status
International classification (ICS): 65.060
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GBZ/T 192.1Determination of dust in the
- GB 2894Safety colours and safety signs
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 5918Determination of mixing homogeneity for feed products
- GB/T 10647Feed industry terms
How to Download JB/T 12779-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12779-2016
$199.00