Valid

JB/T 12660-2016Internal combustion engines - Plastic intake manifolds - Technical requirements (English PDF)

内燃机 塑料进气管 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12660-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 15, 2016

Implementation date

June 1, 2016

Scope

JB/T 12660-2016 is the English-translated version of 内燃机 塑料进气管 技术条件.

JB/T 12660-2016 is a recommended Chinese machinery industry standard covering plastic intake manifolds for internal combustion engines. It sets the technical requirements, the test methods, the inspection rules and the marking, packaging, transport and storage for them.

It applies to plastic intake manifolds produced by the blow moulding process for engine intake systems in which the temperature of the medium inside stays below the limit the standard sets.

It quotes GB/T 2918. The document is filed under Chinese classification J96, with the ICS code 27.020.

Found what you need?

Document preview — JB/T 12660-2016

National Standard of the People's Republic of China

ICS
27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Technical requirements
  • 3.1 General
  • 3.2 Appearance requirements
  • 3.3 Unspecified limit deviations
  • 3.4 Geometrical tolerances
  • 3.5 Performance
  • 4 Test methods
  • 4.1 Pre-treatment
  • 4.2 Appearance requirements
  • 4.3 Heat resistance
  • 4.4 Cold resistance
  • 5 Inspection rules
  • 5.1 General
  • 5.2 Factory inspection
  • 5.3 Type test
  • 6 Marking, packaging, transport and storage
  • 6.1 Marking
  • 6.2 Packaging
  • 6.3 Transport
  • 6.4 Storage
  • Table 1 Unspecified limit deviations
  • Table 2 Unspecified limit deviations of the wall thickness
  • Table 3 Performance of the plastic intake manifold
  • Table 4 Temperature resistance conditions of the different materials used for the plastic intake manifold

What this standard covers

This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of the internal combustion engine plastic intake pipe. This standard applies to the internal combustion engine intake system in the internal medium temperature below 90°C and the use of blow molding process to produce plastic intake pipe (hereinafter referred to as plastic intake pipe).

Document data

International classification (ICS): 27.020.

Chinese classification (CCS): J96.

Estimated length of the Chinese original: 6,689 words.

Standards quoted by this document

GB/T 2918

3 Technical requirements

4 Test methods

5 Inspection rules

6 Marking, packaging, transport and storage

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12660-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12660-2016

$109.00