JB/T 12611-2016Inspection methods for shrink-fit chuck tool holders (English PDF)
热装夹头刀柄检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12611-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 15, 2016
Implementation date
June 1, 2016
Scope
JB/T 12611-2016 is the English-translated version of 热装夹头刀柄检测方法.
JB/T 12611-2016 is a recommended Chinese machinery industry standard on inspection methods for tool shanks with shrink-fit chucks.
It prescribes the common method of checking the technical parameters that shrink-fit chucks of various kinds have in common, noting that parameters outside that common set call for their own testing standard and that the methods it gives are not the only ones possible.
It applies to the inspection of shrink-fit chucks of all these kinds. It quotes GB/T 228.1-2010, GB/T 10128-2007, GB/T 25377-2010 and JB/T 10231.1. The Ministry of Industry and Information Technology issued it, with Chinese classification J41 and international classification 25.100.01.
Found what you need?
Document preview — JB/T 12611-2016
National Standard of the People's Republic of China
- ICS
- 25.100.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Basis of the testing
- 4 Inspection of the appearance
- 5 Inspection of the surface roughness
- 6 Inspection of the main dimensions
- 6.1 General description
- 6.2 Inspection of the dimensions of the shank
- 6.3 Inspection of the diameter of the clamping bore
- 6.4 Inspection of the radial run-out of the clamping bore
- 7 Inspection of the clamping force of the chuck
- 7.1 Inspection of the axial clamping force
- 7.2 Inspection of the circumferential clamping torque
- 8 Inspection of the dynamic balancing accuracy
- 9 Inspection of the hardness
- 10 Inspection of the marking
- 11 Inspection of the packaging
- 12 Inspection of the surface treatment
- Figure 1 Structural diagram of the standard type shrink fit chuck tool holder
- Figure 2 Inspection of the radial run-out of the clamping bore
- Figure 3 Shrink fit chuck assembly for inspecting the axial or circumferential clamping force
What this standard covers
This standard specifies the common method of detecting the common technical parameters of various hot-holding chucks. For the detection method of non-common technical parameters, the testing method standard is required. The various testing methods specified in this standard are not unique. This standard applies to the detection of various hot chucks.
Document data
International classification (ICS): 25.100.01.
Chinese classification (CCS): J41.
Estimated length of the Chinese original: 6,664 words.
Standards quoted by this document
GB/T 228.1-2010; GB/T 10128-2007; GB/T 25377-2010; JB/T 10231.1
3 Basis of the testing
4 Inspection of the appearance
5 Inspection of the surface roughness
6 Inspection of the main dimensions
7 Inspection of the clamping force of the chuck
8 Inspection of the dynamic balancing accuracy
9 Inspection of the hardness
10 Inspection of the marking
11 Inspection of the packaging
12 Inspection of the surface treatment
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12611-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10128-2007 — Metallic materials - Torsion test at ambient temperature
GB/T 228.1-2010 — Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 25377-2010 — Check bar
Secure payment via Stripe
Payments accepted
JB/T 12611-2016
$99.00