Valid

JB/T 12577-2015Loader cranes (English PDF)

随车起重机

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12577-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12577-2015 is the English-translated version of 随车起重机.

JB/T 12577-2015 is the Chinese standard "Loader cranes". Its scope clause reads: This standard specifies the terms and definitions, classification and specification, requirements, test methods, inspection rules, product identification, instructions, transportation, packaging and storage of loader cranes.

This standard is applicable to the loader cranes (hereinafter referred to as cranes) installed on vehicles, and other installation forms of cranes may be implemented by reference. Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 12577-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Classification and specification
  • 5 Requirements
  • 6 Test method
  • 7 Inspection rules
  • 8 Product identification, instructions, transportation, packaging and storage
  • Annex A (Informative) Schematic diagram of the main structure of crane
  • Annex B (Informative) Test record
  • Annex C (Normative) Structural stress test method
  • Annex D (Normative) Test items
  • Bibliography
  • Figure 1 Determination of distance between outrigger
  • Figure 2 Determination of lifting height
  • Figure 3 Determination of boom length of straight-boom-type crane
  • Figure 4 Determination of boom length of articulating-boom-type crane
  • Figure A.1 Schematic diagram of the main structure of straight-boom-type crane
  • Figure A.2 Schematic diagram of the main structure of articulating-boom-type crane
  • Table 1 Maximum hoisting capacity parameters
  • Table 2 Safety requirements for wire rope clamp connection
  • Table 3 Test conditions and number of cycles in the operation reliability test
  • Table 4 Total operation time of operation reliability test
  • Table B.1 Record of structural parameters measurement of crane
  • Table B.2 Record of operating speed measurement
  • Table B.3 Record of boom derricking time and stabilizer extend & retract time
  • Table B.4 Record of static load test
  • Table B.5 Record of structural static stress test In: MPa
  • Table B.6 Record of operation reliability test
  • Table C.1 Structural stress test conditions and loads
  • Table C.2 Strength safety factor
  • Table C.3 Allowable stress of steel and weld of structural members
  • Table D.1 Test items

1 Scope

This standard specifies the terms and definitions, classification and specification, requirements, test methods, inspection rules, product identification, instructions, transportation, packaging and storage of loader cranes.

This standard is applicable to the loader cranes (hereinafter referred to as cranes) installed on vehicles, and other installation forms of cranes may be implemented by reference.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 2893 Safety colours

GB 2894 Safety signs and guideline for the use

GB/T 3766 Hydraulic fluid power—General rules relating to systems

GB/T 3811-2008 Design rules for cranes

GB/T 5972 Cranes—Wire ropes—Care, maintenance, installation, examination and discard

GB 6067.1 Safety rules for lifting appliances—Part 1: General

GB/T 6974.1 Cranes—Vocabulary—Part 1: General

GB/T 7935 Hydraulic fluid power—General requirements for hydraulic components

GB/T 9969 General principles for preparation of instructions for use of industrial products

GB/T 10051.1 Lifting hooks—Part 1: Mechanical properties, lifting capacities, stresses and materials

GB/T 13306 Plates

GB/T 19678 Preparation of instructions—Structuring, content and presentation

GB 20062 Mobile crawler crane—Limits and measurement methods for operating noise

GB/T 21457 Cranes and related equipment—Accuracy requirements for measuring parameters during testing

GB/T 25195.1 Cranes—Graphic symbols—Part 1: General

GB/T 26473-2011 Cranes—Safety requirements for loader cranes

JB/T 2300 Slewing bearing

JB/T 5945 Engineering machinery—General technical specifications for assembling

JB/T 5946 Engineering machinery—General technical specifications for paint coating

JB/T 9737 Mobile cranes—Solid particle pollution grade, measurement and selection of the hydraulic fluid

QC/T 252 Type test regulations for special automobile

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 6974.1 and GB/T 26473 as well as the following apply. For the convenience of application, some terms and definitions in GB/T 6974.1 and GB/T 26473 are listed repeatedly as follows.

3.1 loader crane

power-driven crane consisting of a turntable above the base and a boom system fixed to the top of the turntable, installed on a vehicle [including a trailer(s)] for loading and unloading goods

Note 1: It is revised from GB/T 26473-2011, Definition 3.1.1.

Note 2: See Annex B of GB/T 26473-2011 for crane layout and installation.

3.2 maximum hoisting moment

maximum value of the product of the rated capacity and the corresponding operating range ability […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12577-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12577-2015

$500.00