JB/T 12543-2015Superabrasive products - Electroplated diamond wire (English PDF)
超硬磨料制品 电镀金刚石线
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12543-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12543-2015 is the English-translated version of 超硬磨料制品 电镀金刚石线.
JB/T 12543-2015 is the Chinese machinery industry standard covering superabrasive products - Electroplated diamond wire. It was issued on 10 October 2015 and has been in force since 1 March 2016, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 12543-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Dimension codes and product designation
- 4.1 Dimension codes
- 4.2 Product designation
- 5 Product specifications
- 6 Technical requirements
- 6.1 Appearance
- 6.2 Limit deviations of the outer diameter
- 6.3 Bond strength between the coating and the core wire
- 6.4 Breaking tensile force
- 6.5 Distribution density of the diamond
- 6.6 Length deviation
- 7 Test methods
- 7.1 Appearance
- 7.2 Bond strength between the coating and the core wire
- 7.3 Limit deviations of the outer diameter
- 7.4 Breaking tensile force
- 7.5 Distribution density of the diamond
- 7.6 Length deviation
- 8 Inspection rules
- 8.1 Sampling rules
- 8.2 Decision rules
- 9 Marking, packaging, transport and storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transport
- 9.4 Storage
- Figure 1 Diagram of the diamond wire
- Figure 2 Diagram of the support
- Figure 3 Diagram of the winding
- Table 1 Dimensions and codes
- Table 2 Product specifications
- Table 3 Limit deviations of the outer diameter
- Table 4 Breaking tensile force of the diamond wire
- Table 5 Distribution density of the diamond
- Table 6 Sampling rules of the factory inspection
3 Terms and definitions
4 Dimension codes and product designation
5 Product specifications
6 Technical requirements
7 Test methods
8 Inspection rules
9 Marking, packaging, transport and storage
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It is the first edition of this standard.
The document is under the responsibility of the Ministry of Industry and Information Technology.
About this edition
JB/T 12543-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12543-2015 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12543-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12543-2015 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12543-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is JB/T 12543-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 12543-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12543-2015
$145.00