Valid

JB/T 12471-2015Taphole drilling machines for blast furnaces (English PDF)

高炉开铁口机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12471-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12471-2015 is the English-translated version of 高炉开铁口机.

JB/T 12471-2015 covers the taphole drilling machine used on blast furnaces. The machinery industry standard gives terms and definitions, the types and basic parameters, the technical requirements, the test methods and inspection rules, and deals with installation and use, coating, transport, packaging, marking and storage.

It applies to machines that open the taphole of a blast furnace with a drill bit, on furnaces of 300 to 5 800 cubic metres, using hydraulic oil or compressed air as the working medium.

The Ministry of Industry and Information Technology issued it on 10 October 2015 and it came into force on 1 March 2016.

Found what you need?

Document preview — JB/T 12471-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Type and basic parameters
  • 4.1 Main structural types
  • 4.2 Basic parameters
  • 4.3 Model and example of designation
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Technical requirements on the complete machine
  • 5.3 Technical requirements on the main parts and components
  • 6 Test methods and inspection rules
  • 6.1 Test of the impact performance of the taphole drilling machine
  • 6.2 Test and inspection of the complete taphole opening machine
  • 6.3 Inspection rules
  • 7 Installation and use
  • 7.1 Acceptance of the installation
  • 7.2 Requirements on the use of the product
  • 8 Painting
  • 8.1 Surface preparation before painting
  • 8.2 Requirements on the paint film
  • 9 Transport, packaging, marking and storage
  • Annex A (normative) Common models of taphole opening machine
  • Figure 1 Composition of the taphole opening machine
  • Figure 2 Trolley assembly
  • Figure 3 Installation forms of the machine base
  • Figure 4 Positioning methods at the taphole
  • Figure 5 Relative arrangement of the taphole opening machine and of the mud gun
  • Table 1 Basic parameters of the taphole opening machine
  • Table 2 Basic parameters of the hydraulic taphole drilling machine
  • Table 3 Basic parameters of the pneumatic taphole drilling machine
  • Table 4 Key parameters of the taphole opening machine
  • Table 5 Contents of the impact test of the hydraulic taphole drilling machine
  • Table 6 Contents of the impact test of the pneumatic taphole drilling machine
  • Table 7 Limit deviations of the foundation installation dimensions of the taphole opening machine
  • Table A.1 Common models of hydraulic taphole opening machine
  • Table A.2 Common models of pneumatic taphole opening machine

3 Terms and definitions

4 Type and basic parameters

5 Technical requirements

6 Test methods and inspection rules

7 Installation and use

8 Painting

9 Transport, packaging, marking and storage

Foreword

This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.

It is the first edition of this standard.

About this edition

JB/T 12471-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12471-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12471-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12471-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12471-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is JB/T 12471-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download JB/T 12471-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12471-2015

$419.00