Valid

JB/T 12336-2015Small and medium power biomass gas engines - Technical requirements and test methods (English PDF)

中小功率生物质气发动机 技术条件和试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12336-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12336-2015 is the English-translated version of 中小功率生物质气发动机 技术条件和试验方法.

JB/T 12336-2015 is the Chinese machinery industry standard giving the technical requirements and test methods for small and medium power biomass gas engines. It sets the particular requirements and the test methods for spark-ignition engines burning biomass gas through a gas and air mixer.

It applies to generating sets, to irrigation and drainage machinery and to mobile machinery driven by such an engine, whether the engine was designed and built to this standard from the start or converted from a diesel or a petrol engine; other spark-ignition gas engines without a gas and air mixer, or burning a gas other than biomass gas, may be dealt with by reference to it.

Among the standards it quotes are GB/T 1859, GB 17691, GB/T 18363 and QC/T 746-2006.

Found what you need?

Document preview — JB/T 12336-2015

National Standard of the People's Republic of China

ICS
27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 12336-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese machinery industry standard giving the technical requirements and test methods for small and medium power biomass gas engines. It sets the particular requirements and the test methods for spark-ignition engines burning biomass gas through a gas and air mixer. It applies to generating sets, to irrigation and drainage machinery and to mobile machinery driven by such an engine, whether the engine was designed and built to this standard from the start or converted from a diesel or a petrol engine; other spark-ignition gas engines without a gas and air mixer, or burning a gas other than biomass gas, may be dealt with by reference to it. Among the standards it quotes are GB/T 1859, GB 17691, GB/T 18363 and QC/T 746-2006.

JB/T 12336-2015 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 528

GB/T 1147.1

GB/T 1147.2

GB/T 1859

GB/T 2820.5

GB/T 2828.1

GB/T 3765

GB/T 5563

GB/T 6072.4

GB 8335

GB/T 10125

GB/T 14976

GB 15382

GB 15739

GB 17258

GB 17691

GB/T 17895

GB/T 18363

GB/T 20735

QC/T 625

QC/T 674

QC/T 746-2006 — High-pressure pipelines for compressed natural gas vehicles

QC/T 29009

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test

GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise

JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors

JB/T 12335-2015 — Turbochargers - Leak tightness test method

JB/T 12334-2015 — Turbochargers - Noise test method

JB/T 12331-2015 — Reciprocating internal combustion engines - Timing belt drive systems - General requirements and test methods

6 Classification and status

International classification (ICS): 27.020

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 15739

Similar standards

How to Download JB/T 12336-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12336-2015

$504.00