Valid

JB/T 12335-2015Turbochargers - Leak tightness test method (English PDF)

涡轮增压器 密封性试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12335-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12335-2015 is the English-translated version of 涡轮增压器 密封性试验方法.

JB/T 12335-2015 is a recommended Chinese machinery industry standard setting the leak tightness test method for turbochargers. It fixes the test conditions and the test requirements for static sealing and for dynamic negative-pressure sealing, and then the test methods themselves and the acquisition of the data.

The turbochargers it applies to are those specified in GB/T 23341.1-2009. The Chinese classification is J91 and the international classification 27.020, and the catalogue puts the length of the text at about seven and a half thousand characters. It quotes GB/T 23341.1-2009 and GB/T 23341.2-2009.

Found what you need?

Document preview — JB/T 12335-2015

National Standard of the People's Republic of China

ICS
27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 12335-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard setting the leak tightness test method for turbochargers. It fixes the test conditions and the test requirements for static sealing and for dynamic negative-pressure sealing, and then the test methods themselves and the acquisition of the data. The turbochargers it applies to are those specified in GB/T 23341.1-2009. The Chinese classification is J91 and the international classification 27.020, and the catalogue puts the length of the text at about seven and a half thousand characters. It quotes GB/T 23341.1-2009 and GB/T 23341.2-2009.

JB/T 12335-2015 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 23341.1-2009 — Turbochargers - Part 1: General requirements

GB/T 23341.2-2009 — Turbochargers - Part 2: Test methods

4 Where this standard sits

It cites 2 standards, among them GB/T 23341.1-2009, GB/T 23341.2-2009, listed in full above.

One other standard in this catalogue cites it: GB/T 23341.2-2018.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Standards on related subjects:

GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test

GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise

JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors

JB/T 12336-2015 — Small and medium power biomass gas engines - Technical requirements and test methods

JB/T 12334-2015 — Turbochargers - Noise test method

JB/T 12331-2015 — Reciprocating internal combustion engines - Timing belt drive systems - General requirements and test methods

7 Classification and status

International classification (ICS): 27.020

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12335-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12335-2015

$120.00