Valid

JB/T 12333-2015Reciprocating internal combustion engines - Measurement method for noise of cooling fans (English PDF)

往复式内燃机 冷却风扇噪声测量方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12333-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 10, 2015

Implementation date

March 1, 2016

Scope

JB/T 12333-2015 is the English-translated version of 往复式内燃机 冷却风扇噪声测量方法.

JB/T 12333-2015 is a recommended standard of the Chinese machinery industry laying down how the noise of the cooling fans of reciprocating internal combustion engines is to be measured.

The methods it sets out are laboratory measurement, by an engineering method and by a simplified method, and field measurement by a simplified method. It applies to the cooling fans of engines falling within the scope of GB/T 6072.1, and it may serve other cooling fans for which no suitable standard exists.

Its Chinese classification is J96 and its international classification 27.020. It quotes GB/T 1236-2000 and JB/T 12332-2015.

Found what you need?

Document preview — JB/T 12333-2015

National Standard of the People's Republic of China

ICS
27.020

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 12333-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry laying down how the noise of the cooling fans of reciprocating internal combustion engines is to be measured. The methods it sets out are laboratory measurement, by an engineering method and by a simplified method, and field measurement by a simplified method. It applies to the cooling fans of engines falling within the scope of GB/T 6072.1, and it may serve other cooling fans for which no suitable standard exists. Its Chinese classification is J96 and its international classification 27.020. It quotes GB/T 1236-2000 and JB/T 12332-2015.

JB/T 12333-2015 falls under ICS 27.020, in the field of energy and heat transfer engineering.

This catalogue holds 276 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1236-2000 — Industrial fans. Performance testing using standardized airways

GB/T 6072.1

JB/T 12332-2015 — Reciprocating internal combustion engines - Measuring method for noise of air cleaners

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

JB/T 8577-2015 — Internal combustion engines - Water radiators - Specification

JB/T 6723.2-2014 — Cooling Fan for Internal Combustion Engines - Part 2: Technical Requirements of Plastic Fan

JB/T 8127-2011 — Internal combustion engines - Fuel heaters

JB/T 15057-2025 — Internal combustion engine - Cooling system - Cooling module

JB/T 15056-2025 — Internal combustion engine - Cooling system - Condenser

JB/T 14415-2023 — Internal combustion engines - Hybrid power cooling systems - Intelligent motor cooling modules

6 Classification and status

International classification (ICS): 27.020

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12333-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12333-2015

$249.00