JB/T 12261-2015Wave winding machines for motor stators (English PDF)
电机定子波形绕线机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12261-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12261-2015 is the English-translated version of 电机定子波形绕线机.
JB/T 12261-2015 is the Chinese machinery industry standard for the motor stator wave shape wire winding machine.
It opens with terms and definitions and the machine types, then sets the technical requirements, the test methods and the inspection rules, and it goes on to marking, packaging, transport and storage as well as installation, use and maintenance.
The machines it applies to wind and form the wave winding of a motor stator and push it into place. It quotes GB/T 191, GB/T 2900.39, GB/T 13306, GB/T 13384, GB/T 16769 and GB/T 23644. It carries Chinese classification K97.
Found what you need?
Document preview — JB/T 12261-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12261-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the motor stator wave shape wire winding machine. It opens with terms and definitions and the machine types, then sets the technical requirements, the test methods and the inspection rules, and it goes on to marking, packaging, transport and storage as well as installation, use and maintenance. The machines it applies to wind and form the wave winding of a motor stator and push it into place. It quotes GB/T 191, GB/T 2900.39, GB/T 13306, GB/T 13384, GB/T 16769 and GB/T 23644. It carries Chinese classification K97.
JB/T 12261-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 13306
GB/T 2900.39
GB/T 13384
GB/T 16769
GB/T 23644
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 27743-2025 — Inspection method for transformer of special equipment
GB/T 43962.1-2024 — System integration of power battery digital workshop - Part 1: General requirements
GB/T 38331-2019 — General technical requirements for Li-ion battery made machine
JB/T 12262-2015 — Double flyer armature winding and inserting machines for small motors
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 13306Plates
- GB/T 2900.39Electrotechnical terminology - Special equipment for electrical machine and transformer
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 16769Metal-cutting machine tools -- Measurement method of sound pressure level
- GB/T 23644General specifications for electrical special equipment
Similar standards
How to Download JB/T 12261-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12261-2015
$199.00