JB/T 12219-2015YFP series (IP55) variable frequency speed-regulated three-phase asynchronous motors for fans - Technical specifications (frame sizes 80 to 400) (English PDF)
YFP系列(IP55)风机专用变频调速三相异步电动机技术条件(机座号80~400)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12219-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12219-2015 is the English-translated version of YFP系列(IP55)风机专用变频调速三相异步电动机技术条件(机座号80~400).
The YFP series (IP55) of variable frequency, adjustable speed converter-fed three-phase induction motors for fans is the subject of JB/T 12219-2015.
This machinery industry standard fixes the types, basic parameters and dimensions, technical requirements, inspection rules, marking, packaging and warranty for those motors in frame sizes from 80 to 400.
They are intended for fan products in which the load torque and the speed vary quadratically, and motors derived from the series may be built to it by reference.
Among the standards it quotes are GB 755-2008, GB/T 1032-2012, GB/T 4772.1-1999, GB 10068-2008, GB/T 21707-2008 and GB/T 22670-2008. It was issued by the Ministry of Industry and Information Technology and is classified K22 and 29.160.30.
Found what you need?
Document preview — JB/T 12219-2015
National Standard of the People's Republic of China
- ICS
- 29.160.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12219-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The YFP series (IP55) of variable frequency, adjustable speed converter-fed three-phase induction motors for fans is the subject of JB/T 12219-2015. This machinery industry standard fixes the types, basic parameters and dimensions, technical requirements, inspection rules, marking, packaging and warranty for those motors in frame sizes from 80 to 400. They are intended for fan products in which the load torque and the speed vary quadratically, and motors derived from the series may be built to it by reference. Among the standards it quotes are GB 755-2008, GB/T 1032-2012, GB/T 4772.1-1999, GB 10068-2008, GB/T 21707-2008 and GB/T 22670-2008.160.30.
JB/T 12219-2015 falls under ICS 29.160.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1032-2012 — Test procedures for three-phase induction motors
GB 1971
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 4772.1-1999 — Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
GB/T 4772.2-1999 — Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB 10068-2008
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 12665-2008 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
GB 14711
GB/T 21707-2008 — Insulation specification for variable frequency adjustable speed definite purpose converter-fed three-phase induction motors
GB/T 22670-2008 — Test procedures for converter-fed three phase cage induction motors
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 13957-2022 — Technical requirements for the fundamental series of three-phase large asynchronous motor
GB/T 22670-2018 — Test procedures for converter-fed three phase cage induction motors
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
JB/T 12222-2015 — Specification for YYSE2 series (IP55) three-phase induction motors for compressors (frame size 80 to 355)
JB/T 12221-2015 — Specification for YYSP series (IP55) variable frequency three-phase induction motors for compressors (frame size 80 to 355)
JB/T 12220-2015 — Specification for YSP series (IP55) variable frequency three-phase induction motors for pumps (frame size 80 to 355)
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1032-2012Test methods for three-phase asynchronous motors
- GB 1971Rotating Electrical Machines - Terminal Markings and Direction of Rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
Similar standards
How to Download JB/T 12219-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14711-1993 — General requirements for safety of small and medium size rotating electrical machines
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB 1971-1980 — Terminal markings and direction of rotation of rotating electrical machines
JB/T 12219-2015
$594.00