JB/T 12194-2015Hydrodynamic transmission fluids (English PDF)
液力传动油
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12194-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12194-2015 is the English-translated version of 液力传动油.
JB/T 12194-2015 is the Chinese machinery industry standard for hydrodynamic transmission fluids. It divides the oils into categories and then gives the technical requirements, the test methods, the inspection rules and the rules for marking, packaging, transport and storage.
The fluids it covers serve the fluid couplings and torque converters of off-highway equipment, and are blended from a highly refined base oil or a hydrogenated oil with thickening, antioxidant, anti-rust, anti-wear and anti-foam additives.
Among the standards it quotes are GB/T 260, GB/T 265, GB/T 3535, GB/T 11143, GB/T 12581 and NB/SH/T 0845.
Found what you need?
Document preview — JB/T 12194-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12194-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for hydrodynamic transmission fluids. It divides the oils into categories and then gives the technical requirements, the test methods, the inspection rules and the rules for marking, packaging, transport and storage. The fluids it covers serve the fluid couplings and torque converters of off-highway equipment, and are blended from a highly refined base oil or a hydrogenated oil with thickening, antioxidant, anti-rust, anti-wear and anti-foam additives. Among the standards it quotes are GB/T 260, GB/T 265, GB/T 3535, GB/T 11143, GB/T 12581 and NB/SH/T 0845.
JB/T 12194-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 260
GB/T 265
GB/T 511
GB/T 2541
GB/T 3535
GB/T 4756
GB 5096
GB/T 11143
GB/T 12579
GB/T 12581
NB/SH/T 0306
NB/SH/T 0739
NB/SH/T 0845
SH 0164
GB/T 3536
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB 11121-2025 — Gasoline engine oils
GB 11122-2025 — Diesel engine oils
GB 13895-2018 — Heavy duty gear oils for automobile (GL-5)
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 260Test method for water in petroleum products -- Distillation method
- GB/T 265Petroleum products--Determination of kinematic viscosity and calculation of dynamic viscosity
- GB/T 511Petroleum, petroleum products and additives -- Method for determination of mechanical admixtures
- GB/T 2541Petroleum products--Computation table for viscosity indices
- GB/T 3535Determination of pour point for petroleum products
- GB/T 4756Method for manual sampling of petroleum liquids
GB 5096 · NB/SH/T 0306 · NB/SH/T 0739 · NB/SH/T 0845
Similar standards
How to Download JB/T 12194-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11143-1989 — Inhibited mineral oil--Test method of rust preventing characteristics in the presence of water
GB/T 11143-2008 — Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 11143-2025 — Test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
JB/T 12194-2015
$219.00