JB/T 12176-2015Opposed jet mills (English PDF)
对喷式气流磨
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12176-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12176-2015 is the English-translated version of 对喷式气流磨.
JB/T 12176-2015 is the Chinese machinery industry standard for opposed jet mills. It sets the types of the machine and its basic parameters, the technical requirements, the test methods and the inspection rules, and then the signs, the labels and the instruction booklet, the packaging, the transport and the storage.
The mills it covers are used for the dry ultra-fine grinding and breaking up of brittle materials of many kinds, in mining, chemicals, metallurgy, building materials, pharmaceuticals, ceramics, food and animal feed.
Among the standards it quotes are GB/T 191, GB/T 1720-1979, GB/T 3768, GB/T 6388, GB/T 9969, GB/T 13306, GB/T 13384, JB/T 5000.3 and JB/T 5000.12. Its Chinese classification is D94.
Found what you need?
Document preview — JB/T 12176-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 12176-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for opposed jet mills. It sets the types of the machine and its basic parameters, the technical requirements, the test methods and the inspection rules, and then the signs, the labels and the instruction booklet, the packaging, the transport and the storage. The mills it covers are used for the dry ultra-fine grinding and breaking up of brittle materials of many kinds, in mining, chemicals, metallurgy, building materials, pharmaceuticals, ceramics, food and animal feed. Among the standards it quotes are GB/T 191, GB/T 1720-1979, GB/T 3768, GB/T 6388, GB/T 9969, GB/T 13306, GB/T 13384, JB/T 5000.3 and JB/T 5000.12. Its Chinese classification is D94.
JB/T 12176-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 191
GB/T 1720-1979 — Method of test for adhesion of paint films
GB/T 3768
GB/T 6388
GB/T 9969
GB/T 13306
GB/T 13384
JB/T 5000.3
JB/T 5000.12
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
GB/T 25708-2010 — Ball mills and rod mills
JB/T 9023.2-1999 — KQJ down-the-hole drills
JB/T 14593-2025 — Single-cylinder hydraulic cone crusher - Hydraulic and lubrication devices
JB/T 10343-2025 — Vertical compound crusher
JB/T 12182-2015 — High-pressure double-roll lignite briquetting machines
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1720-1979Circle-drawing test of coating films
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB/T 6388Transport package shipping mark
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 13306Plates
How to Download JB/T 12176-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12176-2015
$129.00