JB/T 12103-2014Shears - Evaluation Method for Reliability (English PDF)
剪板机 可靠性评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12103-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12103-2014 is the English-translated version of 剪板机 可靠性评定方法.
JB/T 12103-2014 is a recommended Chinese machinery industry standard setting out the method for evaluating the reliability of shears. It specifies how reliability is verified and measured, how faults are classified and judged, and how samples are taken for assessment.
The testing programme and test methods are laid down, along with fault detection, data collection and the reliability assessment indicators used to reach a result.
GB/T 14404, GB 24389, GB 28240 and JB/T 5197 are cited in its text. It supersedes JB/T 50116-1998 and carries classifications J62 and 25.120.10. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12103-2014
National Standard of the People's Republic of China
- ICS
- 25.120.10
- Replacing
- JB/T 50116-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 12103-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard setting out the method for evaluating the reliability of shears. It specifies how reliability is verified and measured, how faults are classified and judged, and how samples are taken for assessment. The testing programme and test methods are laid down, along with fault detection, data collection and the reliability assessment indicators used to reach a result. GB/T 14404, GB 24389, GB 28240 and JB/T 5197 are cited in its text. It supersedes JB/T 50116-1998 and carries classifications J62 and 25.120.10.
JB/T 12103-2014 falls under ICS 25.120.10, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 14404
GB 24389
GB 28240
JB/T 5197
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
GB/T 36229-2018 — Reliability assessment methods and indices for active opto-electronic protective devices
GB/T 35091-2018 — Straight-sided high-speed mechanical power presses -- Types and basic parameters
JB/T 12095-2014 — Tube bending machining centres
JB/T 12094-2014 — CNC bending lines for truck side members
JB/T 12093-2014 — Roll forming lines for truck side members
6 Classification and status
International classification (ICS): 25.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of JB/T 12103
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 12103-2014 | Shears - Evaluation Method for Reliability | current edition | Current |
| JB/T 50116-1998 | Shears - Evaluation Method for Reliability | previous edition | Superseded |
This page sells the current edition, JB/T 12103-2014. Earlier editions are listed for reference only.
How to Download JB/T 12103-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12103-2014
$195.00