JB/T 12083-2014General Utility Small Gasoline Engine - Specifications for Crankshaft (English PDF)
通用小型汽油机曲轴 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12083-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12083-2014 is the English-translated version of 通用小型汽油机曲轴 技术条件.
JB/T 12083-2014 is the Chinese machinery industry standard covering general Utility Small Gasoline Engine - Specifications for Crankshaft. It was issued on 9 July 2014 and has been in force since 1 November 2014, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2014 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 12083-2014
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Classification of the crankshaft
- 4 Technical requirements
- 4.1 General
- 4.2 Technical requirements for the one-piece crankshaft
- 4.3 Technical requirements for the built-up crankshaft
- 5 Test methods
- 5.1 Test methods for the one-piece crankshaft
- 5.2 Test methods for the built-up crankshaft
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Marking, packaging, transport and storage
- Figure 1 General construction of the crankshaft
- Figure 2 Dimensions of the specimen for the tensile test of the crankshaft
- Figure 3 Diagram of the static balance test of the one-piece crankshaft
- Figure 4 Diagram of the static balance test of the built-up crankshaft
- Figure 5 Diagram of the position of the measurement of the surface hardness of the crank pin
- Figure 6 Diagram of the position of the measurement of the outside diameter of the crank pin
- Table 1 Surface roughness of the main machined surfaces of the crankshaft
- Table 2 Tolerance grades of the circular run-out of the journals and end faces with respect to the common axis of the main journals
- Table 3 Dimensions of the specimen for the tensile test of the crankshaft
Document data
International classification (ICS): 27.020.
Chinese classification (CCS): J92.
3 Classification of the crankshaft
4 Technical requirements
5 Test methods
6 Inspection rules
7 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 12083-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12083-2014
$175.00