Valid

JB/T 12026-2014Crushers for Pumps (English PDF)

泵用破碎机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12026-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 9, 2014

Implementation date

November 1, 2014

Scope

JB/T 12026-2014 is the English-translated version of 泵用破碎机.

JB/T 12026-2014 is the recommended machinery industry standard covering crushers that work with pumps. It defines the crusher types, the models and the basic parameters, then the technical requirements, the test methods and the inspection rules, closing with marking, packaging, transport and storage.

The equipment it addresses is installed at pumping stations, sewage treatment plants and comparable sites. Its classification is B91 in the Chinese system and 65.060.35 in the international one.

It quotes GB/T 191, GB 755, GB/T 1032, GB 1971, GB/T 2828.1, GB/T 4942.1-2006, GB/T 10233, GB 10396, GB/T 13306, GB/T 13384, JB/T 5673 and JB/T 8680. Issued on 9 July 2014, it has applied since 1 November 2014.

Found what you need?

Document preview — JB/T 12026-2014

National Standard of the People's Republic of China

ICS
65.060.35

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 12026-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the recommended machinery industry standard covering crushers that work with pumps. It defines the crusher types, the models and the basic parameters, then the technical requirements, the test methods and the inspection rules, closing with marking, packaging, transport and storage. The equipment it addresses is installed at pumping stations, sewage treatment plants and comparable sites. Its classification is B91 in the Chinese system and 65.060.35 in the international one. It quotes GB/T 191, GB 755, GB/T 1032, GB 1971, GB/T 2828.1, GB/T 4942.1-2006, GB/T 10233, GB 10396, GB/T 13306, GB/T 13384, JB/T 5673 and JB/T 8680.

JB/T 12026-2014 falls under ICS 65.060.35, in the field of agriculture.

This catalogue holds 368 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB 755

GB/T 1032

GB 1971

GB/T 2828.1

GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

GB/T 10233

GB 10396

GB/T 13384

GB/T 13306

JB/T 5673

JB/T 8680

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 12785-2014 — Test methods for submersible motor-pumps

GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines

JB/T 10600-2006 — Vertical self-priming pumps

JB/T 15445-2026 — Rice orderly seedling throwing transplanter

JB/T 15444-2026 — Granular fertilizer dryer

JB/T 13081-2026 — Self-propelled tracklaying rotary teller

6 Classification and status

International classification (ICS): 65.060.35

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

How to Download JB/T 12026-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12026-2014

$115.00