JB/T 12017-2014Pneumatic piston gauges (English PDF)
气体活塞式压力计
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12017-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 12017-2014 is the English-translated version of 气体活塞式压力计.
JB/T 12017-2014 is a recommended Chinese machinery industry standard on pneumatic piston gauges, the pressure measuring instruments in which a piston is balanced against a gas pressure.
It specifies their basic parameters, technical requirements, test methods and inspection rules, along with the requirements for marking, packaging and storage. Its provisions cover instruments in which the load is applied directly or through a load bearing device.
GB/T 13384 and GB/T 25480 are quoted in the text. The standard sits under the Chinese classification N11 and the international classification 17.100. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 12017-2014
National Standard of the People's Republic of China
- ICS
- 17.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12017-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on pneumatic piston gauges, the pressure measuring instruments in which a piston is balanced against a gas pressure. It specifies their basic parameters, technical requirements, test methods and inspection rules, along with the requirements for marking, packaging and storage. Its provisions cover instruments in which the load is applied directly or through a load bearing device. GB/T 13384 and GB/T 25480 are quoted in the text. The standard sits under the Chinese classification N11 and the international classification 17.100.
JB/T 12017-2014 falls under ICS 17.100, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 13384
GB/T 25480
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Standards on related subjects:
GB/T 20730.2-2019 — Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing
GB/T 15478-2015 — Test methods of the performances for pressure transducer/sensor
GB/T 19146-2010 — Infrared devices for instant screening of human skin temperature
JB/T 12016-2014 — Pressure Gauge with Photo-electric Contact
JB/T 12015-2014 — Diaphragm differential pressure gauges
JB/T 12014-2014 — Clean-type pressure gauges
6 Classification and status
International classification (ICS): 17.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12017-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 25480-2010 — Basic environmental conditions and testing methods for transportation and storage of instruments
JB/T 12017-2014
$285.00