JB/T 12015-2014Diaphragm differential pressure gauges (English PDF)
膜片式差压表
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12015-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 12015-2014 is the English-translated version of 膜片式差压表.
Diaphragm differential pressure gauges are dealt with in JB/T 12015-2014, a recommended Chinese machinery industry standard. It classifies these products and states their requirements, test methods and inspection rules, as well as the requirements for signs, packaging and storage.
The instruments in view are those whose elastic sensing element is a corrugated metal diaphragm. The document sits under the Chinese classification N11 and the international classification 17.100 with the other pressure instrument standards of its series.
It draws on GB/T 2423.10, GB/T 13384, GB/T 17214.3-2000, GB/T 25480, JB/T 5528 and JB/T 9252. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 12015-2014
National Standard of the People's Republic of China
- ICS
- 17.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12015-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Diaphragm differential pressure gauges are dealt with in JB/T 12015-2014, a recommended Chinese machinery industry standard. It classifies these products and states their requirements, test methods and inspection rules, as well as the requirements for signs, packaging and storage. The instruments in view are those whose elastic sensing element is a corrugated metal diaphragm. The document sits under the Chinese classification N11 and the international classification 17.100 with the other pressure instrument standards of its series. It draws on GB/T 2423.10, GB/T 13384, GB/T 17214.3-2000, GB/T 25480, JB/T 5528 and JB/T 9252.
JB/T 12015-2014 falls under ICS 17.100, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.10
GB/T 13384
GB/T 17214.3-2000 — Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
GB/T 25480
JB/T 5528
JB/T 9252
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 20730.2-2019 — Instruments with analogue inputs and two-or multi-state outputs for use in industrial-process control systems -- Part 2: Guidance for inspection and routine testing
GB/T 15478-2015 — Test methods of the performances for pressure transducer/sensor
GB/T 19146-2010 — Infrared devices for instant screening of human skin temperature
JB/T 12017-2014 — Pneumatic piston gauges
JB/T 12016-2014 — Pressure Gauge with Photo-electric Contact
JB/T 12014-2014 — Clean-type pressure gauges
6 Classification and status
International classification (ICS): 17.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.10Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 17214.3-2000Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
- GB/T 25480Basic environmental conditions and testing methods for transportation and storage of instruments
- JB/T 5528Scales and graduations of pressure gauges
- JB/T 9252Industrial process measurement and control instruments - Basic types and dimensions of pointer indicating parts and general technical requirements for pointers
Similar standards
How to Download JB/T 12015-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 17214.3-2000 — Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
JB/T 12015-2014
$195.00