JB/T 12003-2014Specification for Valve Cryogenic Test Rig (English PDF)
阀门低温试验装置规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12003-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12003-2014 is the English-translated version of 阀门低温试验装置规范.
JB/T 12003-2014 is a recommended Chinese machinery industry standard that specifies cryogenic test rigs for valves. It gives the terms and definitions for cryogenic valve test equipment, the structure of such a rig, the technical requirements it must meet and the operating procedures for running it.
The equipment it addresses is used to test cryogenic valves over a range that runs from nominal pressure PN16 to PN420. Documents quoted include GB 5099, GB 24159, GB/T 18442.1 to GB/T 18442.6, GB/T 24925 and JB/T 9081. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12003-2014
National Standard of the People's Republic of China
- ICS
- 23.060.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12003-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that specifies cryogenic test rigs for valves. It gives the terms and definitions for cryogenic valve test equipment, the structure of such a rig, the technical requirements it must meet and the operating procedures for running it. The equipment it addresses is used to test cryogenic valves over a range that runs from nominal pressure PN16 to PN420. Documents quoted include GB 5099, GB 24159, GB/T 18442.1 to GB/T 18442.6, GB/T 24925 and JB/T 9081.
JB/T 12003-2014 falls under ICS 23.060.01, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 5099
GB 24159
GB/T 18442.1
GB/T 18442.2
GB/T 18442.3
GB/T 18442.4
GB/T 18442.5
GB/T 18442.6
GB/T 24925
JB/T 9081
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 12220-2015 — Industrial valves -- Marking
GB/T 12221-2005 — Metal valves -- Face to face, end to end, center to face and center to end dimensions
JB/T 106-2004 — Valves - Marking and painting
JB/T 12006-2025 — Steel pipe welded ball valve
JB/T 12001-2014 — Valves for supercritical and ultra-supercritical thermal power plants - General requirements
JB/T 12000-2014 — Specification for forged steel pressure-containing parts of valves for supercritical and ultra-supercritical thermal power plants
6 Classification and status
International classification (ICS): 23.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 5099Seamless steel gas cylinders
- GB/T 18442.1Static vacuum insulated cryogenic pressure vessels - Part 1:General requirements
- GB/T 18442.2Static vacuum insulated cryogenic pressure vessels—Part 2:Materials
- GB/T 18442.3Static vacuum insulated cryogenic pressure vessels—Part 3: Design
- GB/T 18442.4Static vacuum insulated cryogenic pressure vessels - Part 4: Fabrication
- GB/T 18442.5Static vacuum insulated cryogenic pressure vessels - Part 5: Inspection and testing
GB 24159
Similar standards
How to Download JB/T 12003-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5099-1985 — Seamless steel gas cylinders
GB 5099-1994 — Seamless steel gas cylinders
GB/T 18442.1-2011 — Static vacuum insulated cryogenic pressure vessel - Part 1: General requirements
JB/T 12003-2014
$85.00