JB/T 11996-2014General Technical Requirements of Remote Sensing Equipment for Motor Vehicle Exhaust (English PDF)
机动车尾气遥测设备 通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11996-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11996-2014 is the English-translated version of 机动车尾气遥测设备 通用技术要求.
JB/T 11996-2014 is a recommended Chinese machinery industry standard giving the general technical requirements for remote sensing equipment used to measure motor vehicle exhaust.
It sets out how such equipment is classified, how it is built, the requirements it must meet, the test methods, the inspection rules, and the instructions, packaging, transport and storage that go with it.
It applies to equipment that works by absorption spectrometry. GB/T 5181, GB/T 21255, JJG 688, JB/T 9329-1999, GA/T 497 and JT/T 506 are among the documents quoted, and the standard carries the classification N17 and the international classification 17.180.30. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 11996-2014
National Standard of the People's Republic of China
- ICS
- 17.180.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11996-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the general technical requirements for remote sensing equipment used to measure motor vehicle exhaust. It sets out how such equipment is classified, how it is built, the requirements it must meet, the test methods, the inspection rules, and the instructions, packaging, transport and storage that go with it. It applies to equipment that works by absorption spectrometry. GB/T 5181, GB/T 21255, JJG 688, JB/T 9329-1999, GA/T 497 and JT/T 506 are among the documents quoted, and the standard carries the classification N17 and the international classification 17.180.30.
JB/T 11996-2014 falls under ICS 17.180.30, in the field of metrology and measurement.
This catalogue holds 163 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB/T 5181
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 21255
JJG 688
JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage
GA/T 497
JT/T 506
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 17213.16-2015 — Industrial-process control valves -- Part 8-4: Noise considerations -- Prediction of noise generated by hydrodynamic flow
DL/T 680-2015 — Specification for electric power industry wear-resistant pipes
JB/T 9249-1999 — Vortex shedding flow transducers
JB/T 15098-2025 — Flow controller
JB/T 12573-2018 — Vertical remote sensing equipment for vehicle exhaust - General technical requirements
JB/T 10389-2014 — Reliability design review for intelligent instruments
6 Classification and status
International classification (ICS): 17.180.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 5181Automotive emission--Terms and definitions
- GB/T 9969-2008General principles for preparation of instructions for use of industrial products
- GB/T 21255Motor vehicle speed detector
- JJG 688Vehicle Exhaust Emissions Measuring Instruments
- JB/T 9329-1999Instruments - Basic environmental conditions and test methods for transportation and storage
Similar standards
How to Download JB/T 11996-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GA/T 497-2004 — General technical specifications for intelligent monitoring and recording system for vehicles on roads
GA/T 497-2009 — General technical specifications for intelligent monitoring and recording system for vehicles on roads
GA/T 497-2016 — General technical specifications for intelligent monitoring and recording system for vehicles on roads
JB/T 11996-2014
$135.00