JB/T 11904-2014Progressive Dies for Motor Cores - Specifications (English PDF)
电机铁芯级进模 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11904-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 11904-2014 is the English-translated version of 电机铁芯级进模 技术条件.
JB/T 11904-2014 is the recommended Chinese machinery industry standard for progressive dies for motor cores. It states the requirements for these dies and the way they are tested and inspected, and it sets the rules for labelling, packaging and transport.
The standard applies to the cores of motors in household electrical appliances, in industrial motors, in motor vehicles and in power tools. It carries Chinese classification J46 and ICS 25.120.30, with the Ministry of Industry and Information Technology as issuing body.
Among the standards it quotes are GB/T 196, GB/T 197, GB/T 1184-1996, GB/T 1804-2000, GB/T 3098.1-2000, GB/T 16743-2010 and JB/T 8050-2008.
Found what you need?
Document preview — JB/T 11904-2014
National Standard of the People's Republic of China
- ICS
- 25.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 11904-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for progressive dies for motor cores. It states the requirements for these dies and the way they are tested and inspected, and it sets the rules for labelling, packaging and transport. The standard applies to the cores of motors in household electrical appliances, in industrial motors, in motor vehicles and in power tools. It carries Chinese classification J46 and ICS 25.120.30, with the Ministry of Industry and Information Technology as issuing body. Among the standards it quotes are GB/T 196, GB/T 197, GB/T 1184-1996, GB/T 1804-2000, GB/T 3098.1-2000, GB/T 16743-2010 and JB/T 8050-2008.
JB/T 11904-2014 falls under ICS 25.120.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 196
GB/T 197
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3098.1-2000 — Mechanical properties of fasteners. Bolts, screws and studs
GB/T 16743-2010 — Blanking clearance
JB/T 8050-2008 — Technical requirements for stamping die sets
4 Where this standard sits
It cites 7 standards, among them GB/T 1184-1996, GB/T 1804-2000, GB/T 3098.1-2000, listed in full above.
12 other standards in this catalogue cite it, among them JB/T 12642.1-2016, JB/T 12642.10-2016, JB/T 12642.11-2016.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack
GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions
JB/T 6057-1992 — Steels for moulding parts of plastic moulds and their heat treatment - Technical specifications
JB/T 11903-2025 — Progressive dies for heat exchanging fins
JB/T 11902-2014 — Progressive Dies for Electric Connectors - Specifications
JB/T 11901-2014 — Cold Forging Dies - Specifications
7 Classification and status
International classification (ICS): 25.120.30
Chinese Standard Classification (CCS): J 46
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 196General purpose metric screw threads - Basic dimensions
- GB/T 197General purpose metric screw threads -- Tolerances
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3098.1-2000Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 16743-2010Blanking clearance
Cited by
- JB/T 12642.1-2016Progressive dies for motor cores - Components - Part 1: Interlocking punches
- JB/T 12642.10-2016Progressive dies for motor cores - Components - Part 10: Pilot pins
- JB/T 12642.11-2016Progressive dies for motor cores - Components - Part 11: Misfeed detection pins
- JB/T 12642.12-2016Progressive dies for motor cores - Components - Part 12: Lifter blocks
- JB/T 12642.2-2016Progressive dies for motor cores - Components - Part 2: Interlocking dies
- JB/T 12642.3-2016Progressive dies for motor cores - Components - Part 3: Counting punches
Similar standards
How to Download JB/T 11904-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 16743-2010 — Blanking clearance
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
JB/T 11904-2014
$165.00