JB/T 11861-2014Cutting tools for shield machines (English PDF)
盾构机切削刀具
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11861-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11861-2014 is the English-translated version of 盾构机切削刀具.
JB/T 11861-2014 is a recommended Chinese machinery industry standard for the cutting tools of shield machines. It specifies the types of tool and the way models are designated, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
Cutting tools fitted to a shield machine are its stated field of application. The document was issued by the Ministry of Industry and Information Technology under the Chinese classification J41 and the international classification 73.100.10.
Among the standards it quotes are GB/T 230.1, GB/T 699, GB/T 1591, GB/T 3077, the four parts of GB/T 6247, GB/T 18376.2, JB/T 3576 and JB/T 7302.
Found what you need?
Document preview — JB/T 11861-2014
National Standard of the People's Republic of China
- ICS
- 73.100.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11861-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the cutting tools of shield machines. It specifies the types of tool and the way models are designated, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Cutting tools fitted to a shield machine are its stated field of application. The document was issued by the Ministry of Industry and Information Technology under the Chinese classification J41 and the international classification 73.100.10. Among the standards it quotes are GB/T 230.1, GB/T 699, GB/T 1591, GB/T 3077, the four parts of GB/T 6247, GB/T 18376.2, JB/T 3576 and JB/T 7302.
JB/T 11861-2014 falls under ICS 73.100.10, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 230.1
GB/T 699
GB/T 1591
GB/T 2828.1
GB/T 3077
GB/T 6247.1
GB/T 6247.2
GB/T 6247.3
GB/T 6247.4
GB/T 18376.2
JB/T 3576
JB/T 7164
JB/T 7302
JB/T 9857
4 Where this standard sits
It cites 14 standards, listed in full above.
One other standard in this catalogue cites it: JB/T 13384-2018.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 972-2008 — Thread rolling flat dies
GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines
GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines
JB/T 15090-2025 — Carbide small module gear shaping cutter - General Technical Specifications
JB/T 15089-2025 — Superhard internal coolant reamer
JB/T 14216-2021 — Taps for 80° non-sealing pipe threads
7 Classification and status
International classification (ICS): 73.100.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 699Quality carbon structure steels
- GB/T 1591High strength low alloy structural steels
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3077Alloy Structure Steels
- GB/T 6247.1Rock drilling machines and portable power tools -- Terminology -- Part 1: Rock drilling machines, pneumatic tools and machines
Similar standards
How to Download JB/T 11861-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1591-1994 — [Replaced by GB/T 1591-2018] High strength low alloy structural steels
GB/T 1591-2008 — [GB 1591-2018] High strength low alloy structural steels
GB/T 1591-2018 — High strength low alloy structural steels
JB/T 11861-2014
$115.00