JB/T 11815-2014Safety Double Solenoid Valve for Mechanical Presses - Specification (English PDF)
机械压力机用安全双联电磁阀 技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11815-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11815-2014 is the English-translated version of 机械压力机用安全双联电磁阀 技术要求.
JB/T 11815-2014 is a recommended Chinese machinery industry standard for the safety double solenoid valve fitted to mechanical presses.
It gives the terms and definitions for the valve, its classification and nomenclature, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
Its Chinese classification is J62 and its international classification 25.120.01, and it was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 786.1, GB/T 2423.1-2008, GB 5226.1-2008, GB 14048.1 and GB 27607-2011.
Found what you need?
Document preview — JB/T 11815-2014
National Standard of the People's Republic of China
- ICS
- 25.120.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 11815-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the safety double solenoid valve fitted to mechanical presses. It gives the terms and definitions for the valve, its classification and nomenclature, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Its Chinese classification is J62 and its international classification 25.120.01, andAmong the standards it quotes are GB/T 786.1, GB/T 2423.1-2008, GB 5226.1-2008, GB 14048.1 and GB 27607-2011.
JB/T 11815-2014 falls under ICS 25.120.01, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 786.1
GB/T 1184
GB/T 1804
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state
GB/T 2423.5-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.10-2008 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 13306
GB 14048.1
GB/T 23281
GB 27607-2011 — Mechanical press -- Safety requirements
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters
GB/T 36229-2018 — Reliability assessment methods and indices for active opto-electronic protective devices
GB/T 35091-2018 — Straight-sided high-speed mechanical power presses -- Types and basic parameters
JB/T 11812.2-2014 — Movable Plate Shears - Part 2: Specifications
JB/T 11812.1-2014 — Movable Plate Shears - Part 1: Type and Basic Parameters
JB/T 11811-2014 — Manual Press
6 Classification and status
International classification (ICS): 25.120.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 786.1Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
Similar standards
How to Download JB/T 11815-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 27607-2011 — Mechanical press -- Safety requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
JB/T 11815-2014
$235.00