JB/T 11783.2-2014Reciprocating Internal Combustion Engines - Accessory Drive Systems - Part 2: Test Methods (English PDF)
往复式内燃机 附件传动系统 第2部分:试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11783.2-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11783.2-2014 is the English-translated version of 往复式内燃机 附件传动系统 第2部分:试验方法.
JB/T 11783.2-2014 is Part 2 of the Chinese machinery standard on accessory drive systems for reciprocating internal combustion engines and carries the test methods.
It specifies the test methods and the inspection rules for belts, tensioners and pulleys. Besides engine accessory drives, it is also taken up for belt drive systems, pulleys and tensioners used in other industries.
Among the standards it quotes are GB/T 531.1, GB/T 2828.1, GB/T 3505, GB/T 10125, GB/T 11356.1, GB/T 11357, GB 12732, GB 13552, GB/T 19001, JB/T 7700.2, JB/T 10859, JB/T 11783.1-2014 and ISO 12103-1. Its Chinese classification is J91 and its international classification 27.020.
Found what you need?
Document preview — JB/T 11783.2-2014
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11783.2-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It is one of 2 parts of the JB/T 11783 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is Part 2 of the Chinese machinery standard on accessory drive systems for reciprocating internal combustion engines and carries the test methods. It specifies the test methods and the inspection rules for belts, tensioners and pulleys. Besides engine accessory drives, it is also taken up for belt drive systems, pulleys and tensioners used in other industries. Among the standards it quotes are GB/T 531.1, GB/T 2828.1, GB/T 3505, GB/T 10125, GB/T 11356.1, GB/T 11357, GB 12732, GB 13552, GB/T 19001, JB/T 7700.2, JB/T 10859, JB/T 11783.1-2014 and ISO 12103-1. Its Chinese classification is J91 and its international classification 27.020.
JB/T 11783.2-2014 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 531.1
GB/T 2828.1
GB/T 3505
GB/T 3686
GB/T 10125
GB/T 10716
GB/T 11356.1
GB/T 11357
GB/T 11545
GB 12732
GB/T 13490
GB 13552
GB/T 15828
GB/T 17516.2
GB/T 18779.2
GB/T 19001
JB/T 7700.2
JB/T 10859
JB/T 11783.1-2014 — Reciprocating Internal Combustion Engines - Accessory Drive Systems - Part 1: General Requirements
ISO 12103-1
4 Where this standard sits
It cites 20 standards, among them JB/T 11783.1-2014, listed in full above.
It is one part of the JB/T 11783 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 11783.1-2014 — Part 1: General Requirements
Standards on related subjects:
GB/T 8243.6-2025 — Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 6: Static burst pressure test
GB/T 14097-2023 — Reciprocating internal combustion engines - Limit values of emitted noise
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 11792.6-2017 — Technical specifications for medium and high power gas engines - Part 6: Heavy fuel oil/natural gas dual fuel engines
JB/T 11786-2014 — Turbochargers - Compressor impeller castings - Specifications
7 Classification and status
International classification (ICS): 27.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3505Geometrical product specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters
- GB/T 3686Belt drives - V-belts and V-ribbed belts - Tensile strength and elongation test method
- GB/T 10125Corrosion tests in artificial atmospheres - Salt spray tests
- GB/T 10716Synchronous belt drives -- Automotive belts -- Determination of physical properties
ISO 12103-1
Similar standards
How to Download JB/T 11783.2-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 11783.2-2014
$270.00