Valid

JB/T 11779-2014Non-Destructive Testing Instrument - Specifications for Phased Array Ultrasonic Testing Instruments (English PDF)

无损检测仪器相控阵超声检测仪技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11779-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

JB/T 11779-2014 is the English-translated version of 无损检测仪器相控阵超声检测仪技术条件.

JB/T 11779-2014 is the Chinese standard "Non-Destructive Testing Instrument - Specifications for Phased Array Ultrasonic Testing Instruments".

Its scope clause reads: This standard specifies the terms and definitions, symbols and meanings, requirements, inspection methods, inspection rules, and marking, packaging, transportation and storage of phased array ultrasonic testing instruments (hereinafter referred to as “phased array testing instruments”).

This standard is applicable to the phased array testing instruments with a testing frequency in the range of 0.2MHz to 25MHz. Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 11779-2014

National Standard of the People's Republic of China

ICS: 19.100

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and meanings
5 Requirements
5.1 General requirements
5.2 Stability
5.3 Pulses in the phased-array instrument
5.4 Receiver
5.5 Positioning error
5.6 Safety requirements
6 Inspection methods
6.1 Inspection conditions
6.2 Inspection equipment
6.3 Appearance
6.4 Stability against temperature
6.5 Testing of battery operational time
6.6 Testing of transmitter pulse parameter
6.7 Testing of pulse repetition frequency
6.8 Testing of effective output impedance
6.9 Testing of transmitting delay precision
6.10 Testing of crosstalk damping during channel
6.11 Testing of dynamic range
6.12 Testing of amplifier frequency response
6.13 Testing of input impedance
6.14 Testing of analog gain attenuator accuracy
6.15 Testing of time-dependent gain (TDG)
6.16 Channel consistency testing
6.17 Linearity testing of phased array testing instrument
6.18 Positioning error testing
6.19 Basic safety requirements
7 Inspection rules
7.1 End-of-manufacturing inspection and type inspection items
7.2 End-of-manufacturing inspection
7.3 Type Inspection
7.4 Judgment rules
8 Marking, packaging, transportation and storage
8.1 Marking
8.2 Packaging, transportation and storage
Annex A (Informative) Phased array calibration test block
Annex B (Informative) Phased array linearity test block

1 Scope

This standard specifies the terms and definitions, symbols and meanings, requirements, inspection methods, inspection rules, and marking, packaging, transportation and storage of phased array ultrasonic testing instruments (hereinafter referred to as “phased array testing instruments”).

This standard is applicable to the phased array testing instruments with a testing frequency in the range of 0.2MHz to 25MHz.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 191 Packaging - Pictorial marking for handling of goods

GB 4208 Degrees of protection provided by enclosure (IP code)

GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

GB/T 6587-2012 General specification for electronic measuring instruments

GB/T 12604.1 Non-destructive testing - Terminology - Terms used in ultrasonic testing

GB/T 19001 Quality management systems - Requirements

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 12604.1 and the following apply.

3.1 phased array

array elements in the array controlled via electronic system, transmitting and receiving ultrasonic waves according to a certain delay time rule so as to dynamically control the deflection and focusing of the ultrasonic beams in the workpiece

3.2 crosstalk damping during channel

amount of energy transfer from the output end of pulses in the phased-array instrument to the input end of neighbouring channels

3.3 calibrated dB-switch

device controlling the gain of the phased array testing instrument calibrated in decibels

3.4 linearity of time base

measure of how close the horizontal graticule reading of a signal on the screen of phased array testing instrument is to being directly proportional to the time-of-flight of an echo

3.5 digitization sampling error

error introduced into the displayed amplitude of an input signal by the periodic nature of measurements taken by an analogue-to-digital converter

3.6 dynamic range

ratio of the amplitude of the largest signal to the smallest signal which a phased array testing instrument can display, wherein the smallest signal can be limited by system noise, the largest signal can be limited by the saturation of the amplifier, and the largest signal that can be displayed on the display is also limited by the maximum attenuation

3.7 display height linearity

measure of how close the vertical graticule reading of a signal on the screen of phased array testing instrument is to being directly proportional to the input signal amplitude […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Referenced standards

Normative references

GB 4208

Cited by

NB/T 47013.15-2021Nondestructive testing of pressure equipments - Part 15: Phased-array ultrasonic testing

Similar standards

GB/T 42399.1-2023|GB/T 42399.2-2023|GB/T 42399.3-2023|JB/T 11731-2013|GB/T 47876-2026|NB/T 11663.2-2024

How to Download JB/T 11779-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.