JB/T 11773.1-2014NC screw rotor milling machines - Part 1: Testing of the accuracy (English PDF)
数控螺旋转子铣床 第1部分:精度检验
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11773.1-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 11773.1-2014 is the English-translated version of 数控螺旋转子铣床 第1部分:精度检验.
JB/T 11773.1-2014 is a recommended Chinese machinery industry standard and the first part of the work on numerically controlled screw rotor milling machines, the part devoted to accuracy testing.
It sets the requirements and the test methods for the geometric accuracy of the machine and for the positioning accuracy of its numerically controlled axes. The machines within its reach are those whose maximum milling diameter runs from 20 mm to 1200 mm.
The classification codes recorded for the document are J56 in the Chinese scheme and 25.040.20 in the international scheme. It quotes GB/T 17421.1-1998 and GB/T 17421.2-2000.
Found what you need?
Document preview — JB/T 11773.1-2014
National Standard of the People's Republic of China
- ICS
- 25.040.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 11773.1-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It is one of 2 parts of the JB/T 11773 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard and the first part of the work on numerically controlled screw rotor milling machines, the part devoted to accuracy testing. It sets the requirements and the test methods for the geometric accuracy of the machine and for the positioning accuracy of its numerically controlled axes. The machines within its reach are those whose maximum milling diameter runs from 20 mm to 1200 mm. The classification codes recorded for the document are J56 in the Chinese scheme and 25.040.20 in the international scheme. It quotes GB/T 17421.1-1998 and GB/T 17421.2-2000.
JB/T 11773.1-2014 falls under ICS 25.040.20, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
GB/T 17421.2-2000 — Test code for machine tools. Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
4 Where this standard sits
It cites 2 standards, among them GB/T 17421.1-1998, GB/T 17421.2-2000, listed in full above.
It is one part of the JB/T 11773 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 21 pages
6 Related standards
Other parts of this standard:
JB/T 11773.2-2014 — CNC Spiral Rotor Milling Machines - Part 2: Specifications
Standards on related subjects:
GB/T 38193-2019 — Machine tools automatic production line for automobile gears
JB/T 12396-2015 — Proportional valve solenoids
JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements
JB/T 11769.2-2014 — Large-sized & Precision CNC Gear Hobbing Machines - Part 2: Specifications
JB/T 11769.1-2014 — Large-sized & Precision CNC Gear Hobbing Machines - Part 1: Testing of the Accuracy
7 Classification and status
International classification (ICS): 25.040.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download JB/T 11773.1-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
GB/T 17421.2-2000 — Test code for machine tools. Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
JB/T 11773.2-2014 — CNC Spiral Rotor Milling Machines - Part 2: Specifications
JB/T 11773.1-2014
$375.00