JB/T 11746-2013Superhard composite reamers (English PDF)
超硬复合铰刀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11746-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11746-2013 is the English-translated version of 超硬复合铰刀.
JB/T 11746-2013 is the recommended Chinese machinery industry standard for superhard composite reamers. It covers both the straight shank and the Morse taper shank versions of the tool, fixing their types and their dimensions, the technical requirements they have to meet, and the basic requirements for marking and packaging.
It applies to reamers used for machining stepped holes in engine cylinder heads. The document is classified J41 in the Chinese system and 25.100.30 in the international one, and it was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 1443, GB/T 4246 and GB/T 1800.2.
Found what you need?
Document preview — JB/T 11746-2013
National Standard of the People's Republic of China
- ICS
- 25.100.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 11746-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard for superhard composite reamers. It covers both the straight shank and the Morse taper shank versions of the tool, fixing their types and their dimensions, the technical requirements they have to meet, and the basic requirements for marking and packaging. It applies to reamers used for machining stepped holes in engine cylinder heads. The document is classified J41 in the Chinese system and 25.100.30 in the international one, andAmong the standards it quotes are GB/T 1443, GB/T 4246 and GB/T 1800.2.
JB/T 11746-2013 falls under ICS 25.100.30, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1443
GB/T 4246
GB/T 1800.2
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 972-2008 — Thread rolling flat dies
GB/T 5104-2008 — The basic types and dimensions of hobs for involute splines
GB/T 5105-2004 — The basic types and dimensions of hobs for 45 Degree pressure angle involute splines
JB/T 11742-2013 — Circular saw blades for cold cutting of metal
JB/T 11741-2013 — Brazed carbide tipped circular saw blades
JB/T 11740-2013 — Masonry chisels
6 Classification and status
International classification (ICS): 25.100.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download JB/T 11746-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1443-1996 — Machine tool. Self-holding tapers for tool shanks
GB/T 1443-2016 — Self-holding tapers for machine tools and tool shanks
GB/T 1800.2-1998 — Limits and fits--Bases--Part 2: Basic rules of tolerances, deviations and fits
JB/T 11746-2013
$145.00