JB/T 11656-2013Rolling arc guides (English PDF)
滚动圆弧导轨副
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11656-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11656-2013 is the English-translated version of 滚动圆弧导轨副.
JB/T 11656-2013 is a recommended standard of the Chinese machinery industry on rolling arc guides. It sets out the terms and definitions used for these guideways and the symbols that go with them.
The mounting dimensions are fixed, and so are the accuracy classes and the tests by which accuracy is checked. Its field of application is the arc guideway of the ball rolling type, and the roller rolling type is named as well.
It quotes GB/T 17421.1-1998. In the Chinese classification it is placed under J51, and in the international classification under 25.060.10.
Found what you need?
Document preview — JB/T 11656-2013
National Standard of the People's Republic of China
- ICS
- 25.060.10
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 11656-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese machinery industry on rolling arc guides. It sets out the terms and definitions used for these guideways and the symbols that go with them. The mounting dimensions are fixed, and so are the accuracy classes and the tests by which accuracy is checked. Its field of application is the arc guideway of the ball rolling type, and the roller rolling type is named as well. It quotes GB/T 17421.1-1998. In the Chinese classification it is placed under J51, and in the international classification under 25.060.10.
JB/T 11656-2013 falls under ICS 25.060.10, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 17587.3-2017 — Ball screws -- Part 3: Acceptance conditions and acceptance tests
JB/T 12396-2015 — Proportional valve solenoids
JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements
JB/T 12605.2-2021 — Nut-rotating ball screw assemblies - Part 2: Testing of the accuracy
JB/T 11658-2013 — Mechanical Spindle Unit for Numerically Controlled Turning Machines
JB/T 11657-2013 — Mechanical Spindle Unit for Machining Centre
6 Classification and status
International classification (ICS): 25.060.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 11656-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 11656-2013
$195.00