JB/T 11573.1-2013Cross-beam NC cylindrical gear milling machines - Part 1: Testing of the accuracy (English PDF)
横梁式数控圆柱齿轮铣齿机 第1部分：精度检验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11573.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11573.1-2013 is the English-translated version of 横梁式数控圆柱齿轮铣齿机 第1部分：精度检验.
JB/T 11573.1-2013 is the first part of the recommended Chinese machinery industry standard on cross-beam NC cylindrical gear milling machines, and it deals with testing of the accuracy.
It gives the requirements and the test methods for the geometric accuracy of the machine, for the positioning accuracy of its numerically controlled axes and for its working accuracy.
It applies to machines whose maximum workpiece diameter runs from 2500 mm to 5000 mm. Its Chinese classification is J56 and its international classification 25.040.20, and the Ministry of Industry and Information Technology issued it.
It quotes GB/T 10095.1-2008, GB/T 13924-2008, GB/T 17421.1-1998, GB/T 17421.2-2000 and GB/T 19660-2005.
Found what you need?
Document preview — JB/T 11573.1-2013
National Standard of the People's Republic of China
- ICS
- 25.040.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 11573.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It is one of 2 parts of the JB/T 11573 series.
2 Scope
This standard is the first part of the recommended Chinese machinery industry standard on cross-beam NC cylindrical gear milling machines, and it deals with testing of the accuracy. It gives the requirements and the test methods for the geometric accuracy of the machine, for the positioning accuracy of its numerically controlled axes and for its working accuracy. It applies to machines whose maximum workpiece diameter runs from 2500 mm to 5000 mm. Its Chinese classification is J56 and its international classification 25.040.20, and the Ministry of Industry and Information Technology issued it. It quotes GB/T 10095.1-2008, GB/T 13924-2008, GB/T 17421.1-1998, GB/T 17421.2-2000 and GB/T 19660-2005.
3 Normative references
JB/T 11573.1-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 10095.1-2008
GB/T 13924-2008 — Inspection code for accuracy of involute cylindrical gears
GB/T 17421.1-1998
GB/T 17421.2-2000
GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 11573.2-2013 — Part 2: Technical requirements
6 Classification and status
International classification (ICS): 25.040.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 10095.1-2008Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- GB/T 13924-2008Inspection code for accuracy of involute cylindrical gears
- GB/T 17421.1-1998Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- GB/T 17421.2-2000Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- GB/T 19660-2005Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
Similar standards
How to Download JB/T 11573.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13924-2008 — Inspection code for accuracy of involute cylindrical gears
GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
JB/T 11573.2-2013 — Cross-beam NC cylindrical gear milling machines - Part 2: Technical requirements
Secure payment via Stripe
Payments accepted
JB/T 11573.1-2013
$349.00