Valid

JB/T 11570.1-2013NC plane milling machines - Part 1: Testing of the accuracy (English PDF)

数控平面铣床 第1部分:精度检验

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11570.1-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11570.1-2013 is the English-translated version of 数控平面铣床 第1部分:精度检验.

JB/T 11570.1-2013 is the first part of the recommended Chinese machinery industry standard on NC plane milling machines, and it is given over to testing of the accuracy.

It sets the requirements and the test methods for the inspection of geometric accuracy, for working accuracy and for positioning accuracy. It applies to vertical NC plane milling machines with a working surface width from 250 mm to 630 mm.

Its Chinese classification is J54 and its international classification 25.080.20, and the issuing body is the Ministry of Industry and Information Technology. It quotes GB/T 17421.1-1998, GB/T 17421.2-2000 and GB/T 19660-2005.

Found what you need?

Document preview — JB/T 11570.1-2013

National Standard of the People's Republic of China

ICS
25.080.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 11570.1-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It is one of 2 parts of the JB/T 11570 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the first part of the recommended Chinese machinery industry standard on NC plane milling machines, and it is given over to testing of the accuracy. It sets the requirements and the test methods for the inspection of geometric accuracy, for working accuracy and for positioning accuracy. It applies to vertical NC plane milling machines with a working surface width from 250 mm to 630 mm. Its Chinese classification is J54 and its international classification 25.080.20, and the issuing body is the Ministry of Industry and Information Technology. It quotes GB/T 17421.1-1998, GB/T 17421.2-2000 and GB/T 19660-2005.

JB/T 11570.1-2013 falls under ICS 25.080.20, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions

GB/T 17421.2-2000 — Test code for machine tools. Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes

GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature

4 Where this standard sits

It cites 3 standards, among them GB/T 17421.1-1998, GB/T 17421.2-2000, GB/T 19660-2005, listed in full above.

One other standard in this catalogue cites it: JB/T 11570.2-2013.

It is one part of the JB/T 11570 series, of which this catalogue holds 2 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 11570.2-2013 — 2: Technical specifications

Standards on related subjects:

JB/T 12396-2015 — Proportional valve solenoids

JB/T 8490-2008 — Floor-type boring machines and floor-type milling and boring machines - Technical requirements

JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements

JB/T 11568-2013 — Five-axis simultaneous gantry milling machines with travelling overhead cross rail - Technical requirements

JB/T 11567-2013 — NC universal rotary head milling machines - Testing of the accuracy

7 Classification and status

International classification (ICS): 25.080.20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11570.1-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11570.1-2013

$405.00