Valid

JB/T 11564-2013Square anti-vibration mounts for machine tools (English PDF)

机床方形减振垫铁

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11564-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11564-2013 is the English-translated version of 机床方形减振垫铁.

JB/T 11564-2013 is a recommended Chinese machinery industry standard covering square anti-vibration mounts for machine tools. It describes the structural types and basic parameters of these mounts, the technical requirements placed on them, the test methods, the inspection rules, and the arrangements for marking, packaging, transport and storage.

The standard applies to square vibration-absorbing mounts for machine tools. It carries the Chinese classification J52 and the international classification 25.060.01.

Among the standards it quotes are GB/T 196-2003, GB/T 531.1-2008, GB/T 3512-2001, GB/T 4879-1999, GB/T 7759-1996, HG/T 3080-2009 and JB/T 9935-2011.

Found what you need?

Document preview — JB/T 11564-2013

National Standard of the People's Republic of China

ICS
25.060.01

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 11564-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard covering square anti-vibration mounts for machine tools. It describes the structural types and basic parameters of these mounts, the technical requirements placed on them, the test methods, the inspection rules, and the arrangements for marking, packaging, transport and storage. The standard applies to square vibration-absorbing mounts for machine tools. It carries the Chinese classification J52 and the international classification 25.060.01. Among the standards it quotes are GB/T 196-2003, GB/T 531.1-2008, GB/T 3512-2001, GB/T 4879-1999, GB/T 7759-1996, HG/T 3080-2009 and JB/T 9935-2011.

JB/T 11564-2013 falls under ICS 25.060.01, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 196-2003 — General purpose metric screw threads - Basic dimensions

GB/T 197-2003 — General purpose metric screw threads – Tolerances

GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

GB/T 531.1-2008 — Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)

GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method

GB/T 4879-1999 — Rustproof packaging

GB/T 6388-1986 — Transport package shipping mark

GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures

HG/T 3080-2009 — Rubber materials for anti-vibration rubber products

JB/T 9935-2011 — Machine tool accessories - Preparation of accompanying technical documents

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

JB/T 12396-2015 — Proportional valve solenoids

GB/T 4346-2008 — Machine tools - Manually operated self-centring chucks

JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements

JB/T 11561-2013 — NC indexing tables

JB/T 11560-2013 — NC automatic chip conveyors

JB/T 11559-2013 — NC automatic filtration devices

6 Classification and status

International classification (ICS): 25.060.01

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11564-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11564-2013

$85.00