JB/T 11509-2013Polyurethane Foaming Equipment - General Specifications (English PDF)
聚氨酯发泡设备通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11509-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11509-2013 is the English-translated version of 聚氨酯发泡设备通用技术条件.
JB/T 11509-2013 is a recommended Chinese machinery industry standard giving the general specifications for polyurethane foaming equipment.
It covers the terms and definitions, the product classification, the models and basic parameters, the requirements, the tests and test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
Among the standards it quotes are GB 150, GB/T 191, GB/T 1184-1996, GB 2894, GB/T 3766-2001, GB 5083, GB 5226.1-2008, GB/T 7932, GB/T 9969, GB 50493, HG/T 3228 and JB/T 5438.
The standard carries Chinese classification G95 and the international classifications 71.120 and 83.200, and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 11509-2013
National Standard of the People's Republic of China
- ICS
- 71.120; 83.200
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11509-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the general specifications for polyurethane foaming equipment. It covers the terms and definitions, the product classification, the models and basic parameters, the requirements, the tests and test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Among the standards it quotes are GB 150, GB/T 191, GB/T 1184-1996, GB 2894, GB/T 3766-2001, GB 5083, GB 5226.1-2008, GB/T 7932, GB/T 9969, GB 50493, HG/T 3228 and JB/T 5438. The standard carries Chinese classification G95 and the international classifications 71.120 and 83.200, and was issued by the Ministry of Industry and Information Technology.
JB/T 11509-2013 falls under ICS 71.120; 83.200, in the field of chemical technology.
This catalogue holds 70 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB 2894
GB/T 3766-2001 — Hydraulic fluid power - General rules relating to systems
GB 5083
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 6576
GB/T 7932
GB/T 7935
GB/T 9438
GB/T 9969
GB/T 12783
GB/T 13306
GB/T 13384
GB 50493
HG/T 3228
JB/T 5438
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
JB/T 15040-2025 — Plastic extrusion profile chipless cutting machine
JB/T 13449-2018 — Take-out robots for plastics injection moulding machines
JB/T 13448-2018 — Screw-plunger plastic injection moulding machines
6 Classification and status
International classification (ICS): 71.120; 83.200
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB 2894Safety colours and safety signs
- GB/T 3766-2001Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 5083General rules for designing the production facilities in accordance with safety and health requirements
Similar standards
How to Download JB/T 11509-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
JB/T 11509-2013
$120.00