Valid

JB/T 11437-2013Pressure Control for Air Compressor (English PDF)

空气压缩机压力控制器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11437-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 11437-2013 is the English-translated version of 空气压缩机压力控制器.

JB/T 11437-2013 is a recommended standard of the Chinese machinery industry for the pressure controller fitted to air compressors. It sets the types, models and basic parameters of the controller, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.

It applies to controllers working under general environmental conditions. The document is classified J20 in the Chinese system and 23.100.99 internationally. Among the standards it quotes are GB/T 191, GB/T 2423.3, GB/T 2828.1, GB 2894, GB 4208-2008, GB/T 13306, GB 14048.1-2006, GB 14048.4-2010 and GB 14048.5-2008.

Found what you need?

Document preview — JB/T 11437-2013

National Standard of the People's Republic of China

ICS
23.100.99

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11437-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for the pressure controller fitted to air compressors. It sets the types, models and basic parameters of the controller, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. It applies to controllers working under general environmental conditions. The document is classified J20 in the Chinese system and 23.100.99 internationally. Among the standards it quotes are GB/T 191, GB/T 2423.3, GB/T 2828.1, GB 2894, GB 4208-2008, GB/T 13306, GB 14048.1-2006, GB 14048.4-2010 and GB 14048.5-2008.

JB/T 11437-2013 falls under ICS 23.100.99, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 2423.3

GB/T 2828.1

GB 2894

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB/T 13306

GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules

GB 14048.4-2010 — Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector)

GB 14048.5-2008 — Low-voltage switchgear and controlgear - Part 5-1:Control circuit devices and switching element - Electromechanical control circuit devices

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 14034.1-2023 — Connections for hydraulic fluid power - Metallic tube connectors - Part 1: 24° cone connectors

GB/T 13871.5-2015 — Rotary shaft lip-type seals incorporating elastomeric sealing elements -- Part 5: Identification of visual imperfections

JB/T 8727-2004 — Hydraulic hose assemblies

JB/T 15355-2025 — Hydraulic ball valve

JB/T 14943-2024 — Test method for deicing dust ring of reciprocating piston rod

JB/T 10205.2-2023 — Hydraulic cylinders - Part 2: Technical specifications for cylinder barrels

6 Classification and status

International classification (ICS): 23.100.99

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11437-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11437-2013

$165.00