JB/T 11436-2013Electronic Pressure Control for Water Pump (English PDF)
电子式水泵压力控制器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11436-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11436-2013 is the English-translated version of 电子式水泵压力控制器.
JB/T 11436-2013 is a recommended Chinese machinery industry standard for the electronic pressure controller used with water pumps. It fixes the types, models and basic parameters of the device, the technical requirements, the test methods, the inspection rules and the rules for marking, packaging, transport and storage.
It applies to electronic pump pressure controllers working under general environmental conditions. The standard is placed at B91 in the Chinese classification and at 65.060.35 in the international one.
Among the standards it quotes are GB/T 191, GB/T 2423.3, GB/T 2828.1, GB 2894, GB 4208-2008, GB 4706.1-2005, GB/T 13306 and GB 14048.4-2010.
Found what you need?
Document preview — JB/T 11436-2013
National Standard of the People's Republic of China
- ICS
- 65.060.35
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 11436-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
2 Scope
This standard is a recommended Chinese machinery industry standard for the electronic pressure controller used with water pumps. It fixes the types, models and basic parameters of the device, the technical requirements, the test methods, the inspection rules and the rules for marking, packaging, transport and storage. It applies to electronic pump pressure controllers working under general environmental conditions. The standard is placed at B91 in the Chinese classification and at 65.060.35 in the international one. Among the standards it quotes are GB/T 191, GB/T 2423.3, GB/T 2828.1, GB 2894, GB 4208-2008, GB 4706.1-2005, GB/T 13306 and GB 14048.4-2010.
3 Normative references
JB/T 11436-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 2423.3
GB/T 2828.1
GB 2894
GB 4208-2008
GB 4706.1-2005
GB/T 13306
GB 14048.4-2010
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 65.060.35
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB 2894Safety colours and safety signs
- GB/T 13306Plates
GB 4208-2008 · GB 4706.1-2005 · GB 14048.4-2010
Similar standards
How to Download JB/T 11436-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 2894-2025 — Safety colours and safety signs
GB/T 13306-2011 — Plates
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
Secure payment via Stripe
Payments accepted
JB/T 11436-2013
$135.00