JB/T 11386-2013High gradient magnetic iron removal filters (English PDF)
高梯度除铁磁过滤器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11386-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11386-2013 is the English-translated version of 高梯度除铁磁过滤器.
JB/T 11386-2013 is a recommended Chinese machinery industry standard covering high gradient magnetic filters for iron removal. It fixes the types and the basic parameters of the equipment and then sets out technical requirements, test methods and inspection rules, closing with provisions on marking, packaging, transportation and storage.
The equipment it deals with is applied to high-temperature condensate. In the Chinese system the document sits under classification J88, and in the international one under 13.030.40.
Among the standards it quotes are GB 150.4-2011, GB/T 9969, GB/T 10595-2009, GB/T 11021-2007, GB/T 13384 and GB/T 25706.
Found what you need?
Document preview — JB/T 11386-2013
National Standard of the People's Republic of China
- ICS
- 13.030.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11386-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering high gradient magnetic filters for iron removal. It fixes the types and the basic parameters of the equipment and then sets out technical requirements, test methods and inspection rules, closing with provisions on marking, packaging, transportation and storage. The equipment it deals with is applied to high-temperature condensate. In the Chinese system the document sits under classification J88, and in the international one under 13.030.40. Among the standards it quotes are GB 150.4-2011, GB/T 9969, GB/T 10595-2009, GB/T 11021-2007, GB/T 13384 and GB/T 25706.
JB/T 11386-2013 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 150.4-2011 — Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance
GB/T 191
GB/T 6388
GB/T 9969
GB/T 10595-2009 — Belt conveyors
GB/T 11021-2007 — Electrical insulation heat resistance classification
GB/T 13306
GB/T 13384
GB/T 25706
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11396-2025 — Biomass power plant flue gas denitrification technology and equipment
JB/T 11391-2025 — Installation technical requirements and acceptance specifications for filter bags for bag filters
JB/T 11378-2013 — Replaceable boneless aeration tubes
6 Classification and status
International classification (ICS): 13.030.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150.4-2011Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 6388Transport package shipping mark
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 10595-2009Belt conveyors
- GB/T 11021-2007Electrical insulation -- Thermal evaluation and designation
Similar standards
How to Download JB/T 11386-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.4-2011 — Pressure Vessels --Part 4: Fabrication, inspection and testing, and acceptance
GB/T 10595-2009 — Belt conveyors
GB/T 11021-2007 — Electrical insulation heat resistance classification
JB/T 11386-2013
$85.00