JB/T 11347-2013EPS Pre-expander Machine (English PDF)
可发性聚苯乙烯泡沫塑料 预发机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11347-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11347-2013 is the English-translated version of 可发性聚苯乙烯泡沫塑料 预发机.
JB/T 11347-2013 is the Chinese machinery industry standard for the pre-expander machine used with expandable polystyrene foam.
It gives the terms and definitions applied to the machine, the models and basic parameters, the requirements it must satisfy, the test methods and the inspection rules, and it settles marking, packaging, transport and storage.
Among the standards it quotes are GB/T 191, GB/T 6388, GB 5226.1-2008, GB/T 12783, GB/T 13306, GB/T 13384, GB 23821-2009 and HG/T 3228. The Chinese classification recorded for it is G95, and internationally it falls under 71.120 and 83.200.
Found what you need?
Document preview — JB/T 11347-2013
National Standard of the People's Republic of China
- ICS
- 71.120; 83.200
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11347-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the pre-expander machine used with expandable polystyrene foam. It gives the terms and definitions applied to the machine, the models and basic parameters, the requirements it must satisfy, the test methods and the inspection rules, and it settles marking, packaging, transport and storage. Among the standards it quotes are GB/T 191, GB/T 6388, GB 5226.1-2008, GB/T 12783, GB/T 13306, GB/T 13384, GB 23821-2009 and HG/T 3228. The Chinese classification recorded for it is G95, and internationally it falls under 71.120 and 83.200.
JB/T 11347-2013 falls under ICS 71.120; 83.200, in the field of chemical technology.
This catalogue holds 70 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 6388
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 12783
GB/T 13306
GB/T 13384
GB 23821-2009
HG/T 3228
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
JB/T 11345-2013 — EPS block moulding machines
JB/T 11344-2013 — PVC compounding systems
JB/T 11343-2013 — Conical Co-rotating Twin-screw Plastics Extruder
6 Classification and status
International classification (ICS): 71.120; 83.200
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 6388Transport package shipping mark
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 12783Editorial nominating method for the modeldesignation of rubber and plastics machinery
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
GB 23821-2009
Similar standards
How to Download JB/T 11347-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 12783-1991 — Editorial nominating method for the model designation of rubber and plastics machinery
GB/T 12783-2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery
JB/T 11347-2013
$299.00