JB/T 11323-2013Small and medium power diesel engines - Evaluation of reliability (English PDF)
中小功率柴油机 可靠性评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11323-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11323-2013 is the English-translated version of 中小功率柴油机 可靠性评定方法.
JB/T 11323-2013 is the Chinese standard "Small and medium power diesel engines - Evaluation of reliability". Its scope clause reads: This standard specifies the evaluation method, bench test method, failure classification and judgment rules for reliability test of small and medium power diesel engines.
This standard is applicable to the reliability test and evaluation of mass-produced small and medium power diesel engines (hereinafter referred to as “diesel engines”). Its clauses include terms and definitions.
Found what you need?
Document preview — JB/T 11323-2013
National Standard of the People's Republic of China
- Replacing
- JB/T 51127-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Evaluation method
- 4.1 Reliability test indexes
- 4.2 Reliability test target value
- 5 Bench test method
- 5.1 Test prototypes
- 5.2 Test conditions
- 5.3 Test items
- 6 Judgment rules
- 6.1 Failure classification
- 6.2 Failure determination
- 7 Test report
- Annex A (Normative) Classification of failure modes for small and medium power diesel engines
- Annex B (Informative) Sampling table for reliability test
- Annex C (Informative) List of engine test equipment and apparatus
- Annex D (Informative) Summary of performance test results for engines
- Annex E (Informative) Record form for failures of reliability test
1 Scope
This standard specifies the evaluation method, bench test method, failure classification and judgment rules for reliability test of small and medium power diesel engines.
This standard is applicable to the reliability test and evaluation of mass-produced small and medium power diesel engines (hereinafter referred to as “diesel engines”).
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1147.1 Small and medium power internal combustion engines - Part 1: General requirements
GB/T 1147.2-2007 Small and medium power internal combustion engines - Part 2: Test methods
GB/T 8190.4-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications
GB/T 21404-2008 Internal combustion engine - Determination and method for the measurement of engine power - General requirements
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 mean time to first failure
MTTFF mean accumulated working time when the diesel engine fails for the first time, in hours (h)
3.2 mean time between failures
MTBF mean working time between two adjacent failures, in hours (h) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 11323
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 11323-2013 | Small and medium power diesel engines - Evaluation of reliability | current edition | Current |
| JB/T 51127-1999 | Small and medium power diesel engines - Evaluation of reliability | previous edition | Superseded |
This page sells the current edition, JB/T 11323-2013. Earlier editions are listed for reference only.
How to Download JB/T 11323-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 11323-2013
$429.00