JB/T 11290-2012Non-resonant vibrating conveyors for mining (English PDF)
矿用非谐振式输送机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11290-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11290-2012 is the English-translated version of 矿用非谐振式输送机.
The non-resonant vibrating conveyor for mining is the machine covered by JB/T 11290-2012, a recommended Chinese machinery industry standard. The document classifies the product and lays down its technical requirements, the test methods by which it is checked and the inspection rules to be applied.
It also governs marking, labelling, the instructions for use, packaging, transportation and storage. Its field of application takes in mining and steel. Chinese classification D99 and international classification 73.100.99 are recorded for the standard.
Among the standards it quotes are GB/T 1184-1996, GB/T 1800.1, GB/T 3768, GB 5226.1, GB/T 10095.1-2008, GB/T 10095.2-2008 and JB/T 5000.12.
Found what you need?
Document preview — JB/T 11290-2012
National Standard of the People's Republic of China
- ICS
- 73.100.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11290-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The non-resonant vibrating conveyor for mining is the machine covered by JB/T 11290-2012, a recommended Chinese machinery industry standard. The document classifies the product and lays down its technical requirements, the test methods by which it is checked and the inspection rules to be applied. It also governs marking, labelling, the instructions for use, packaging, transportation and storage. Its field of application takes in mining and steel. Chinese classification D99 and international classification 73.100.99 are recorded for the standard. Among the standards it quotes are GB/T 1184-1996, GB/T 1800.1, GB/T 3768, GB 5226.1, GB/T 10095.1-2008, GB/T 10095.2-2008 and JB/T 5000.12.
JB/T 11290-2012 falls under ICS 73.100.99, in the field of mining and minerals.
This catalogue holds 265 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1800.1
GB/T 3768
GB 5226.1
GB/T 6388
GB/T 9969
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 13306
JB/T 5000.12
JB/T 5000.13
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 14329-2021 — Ring-roller micro powder mills
JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type
MT/T 1078-2008 — Direct current power supply with intrinsically safe output for a coal mine
JB/T 11115-2025 — Stone mining equipment - Two-dimensional movable disc sawing machine
JB/T 10244-2025 — JPT type reducer
JB/T 11292-2012 — Drum mixers
6 Classification and status
International classification (ICS): 73.100.99
Chinese Standard Classification (CCS): D 99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1800.1Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
- GB/T 3768Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
Similar standards
How to Download JB/T 11290-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 11290-2012
$105.00