JB/T 11289-2012Specification for dry gas seal (English PDF)
干气密封技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11289-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11289-2012 is the English-translated version of 干气密封技术条件.
JB/T 11289-2012 is the Chinese machinery industry standard covering specification for dry gas seal. It was issued on 24 May 2012 and has been in force since 1 November 2012, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2012 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 11289-2012
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Basic types, parameters and type codes
- 4.1 Basic types
- 4.2 Basic parameters
- 4.3 Type codes
- 5 Requirements
- 5.1 General requirements
- 5.2 Technical requirements for the main parts
- 5.3 Performance requirements
- 6 Test methods and inspection rules
- 6.1 Test conditions
- 6.2 Content of the test
- 6.3 Inspection rules
- 7 Installation and service requirements
- 7.1 General requirements
- 7.2 Dry gas seal for compressors
- 7.3 Dry gas seal for pumps
- 8 Marking, packaging, transport and storage
- 8.1 Marking and packaging
- 8.2 Transport and storage
- Annex A (informative) Types of construction of the dry gas seal
- A.1 Dry gas seal for compressors
- A.2 Dry gas seal for pumps
- A.3 Separation seal
- Figure 1 Installation requirements of the dry gas seal
- Figure A.1 DGS/C-A single end face dry gas seal
- Figure A.2 DGS/C-B double end face dry gas seal
- Figure A.3 DGS/C-C tandem dry gas seal
- Figure A.4 DGS/C-D tandem dry gas seal with an intermediate labyrinth seal
- Figure A.5 DGS/P-A1 double end face dry gas seal (back to back)
- Figure A.6 DGS/P-A2 double end face dry gas seal (face to face)
- Figure A.7 DGS/P-B mechanical seal plus dry gas seal
- Figure A.8 Labyrinth seal
- Figure A.9 Carbon ring seal
- Table 1 Basic parameters
What this standard covers
This standard specifies the basic types, parameters, type codes, and technical requirements for dry gas seals. It describes the corresponding test methods and specifies inspection rules, instruments, installation, use, marking, packaging, transportation, and storage. This document applies to the manufacture of dry gas seals for rotating machinery such as centrifugal compressors, single-shaft or multi-shaft gear compressors, expanders, screw compressors, and centrifugal pumps.
Document data
International classification (ICS): 21.14.
Chinese classification (CCS): J22.
3 Terms and definitions
4 Basic types, parameters and type codes
5 Requirements
6 Test methods and inspection rules
7 Installation and service requirements
8 Marking, packaging, transport and storage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 11289-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 11289-2012
$255.00